Enable INP support without ODB libraries

ApplicationExeCode/CMakeLists.txt

@@ -277,7 +277,7 @@ if(RESINSIGHT_ENABLE_GRPC)
   list(APPEND LINK_LIBRARIES GrpcInterface)
 endif()
 
-list(APPEND LINK_LIBRARIES RigGeoMechDataModel)
+list(APPEND LINK_LIBRARIES RigGeoMechDataModel RifGeoMechFileInterface)
 
 if(RESINSIGHT_USE_ODB_API)
   add_definitions(-DUSE_ODB_API)

ApplicationLibCode/CMakeLists.txt

@@ -441,6 +441,7 @@ target_include_directories(
          ${CMAKE_CURRENT_SOURCE_DIR}/UserInterface
          ${CMAKE_CURRENT_SOURCE_DIR}/GeoMech/GeoMechDataModel
          ${CMAKE_CURRENT_SOURCE_DIR}/GeoMech/GeoMechVisualization
+         ${CMAKE_CURRENT_SOURCE_DIR}/GeoMech/GeoMechFileInterface
          ${CMAKE_CURRENT_SOURCE_DIR}/GeoMech/OdbReader
          ${CMAKE_CURRENT_SOURCE_DIR}/Measurement
          ${ResInsight_SOURCE_DIR}/ThirdParty

ApplicationLibCode/Commands/GeoMechCommands/RicGeoMechCopyCaseFeature.cpp

@@ -50,10 +50,15 @@ void RicGeoMechCopyCaseFeature::onActionTriggered( bool isChecked )
         RiaApplication* app          = RiaApplication::instance();
         QString         defaultDir   = app->lastUsedDialogDirectory( "GEOMECH_MODEL" );
 
+        QString filterStr;
+#if USE_ODB_API
+        filterStr += "Abaqus results (*.odb);;";
+#endif
+        filterStr += "Abaqus input file (*.inp)";
+
         for ( RimGeoMechCase* gmc : cases )
         {
-            QString fileName =
-                RiuFileDialogTools::getOpenFileName( nullptr, "Import Geo-Mechanical Model", defaultDir, "Abaqus results (*.odb)" );
+            QString fileName = RiuFileDialogTools::getOpenFileName( nullptr, "Import Geo-Mechanical Model", defaultDir, filterStr );
             if ( fileName.isEmpty() ) break;
 
             defaultDir = QFileInfo( fileName ).absolutePath();

ApplicationLibCode/Commands/GeoMechCommands/RicImportGeoMechCaseFeature.cpp

@@ -34,11 +34,14 @@ void RicImportGeoMechCaseFeature::onActionTriggered( bool isChecked )
 {
     RiaApplication* app = RiaApplication::instance();
 
+    QString filterStr;
+#if USE_ODB_API
+    filterStr += "Abaqus results (*.odb);;";
+#endif
+    filterStr += "Abaqus input file (*.inp)";
+
     QString     defaultDir = app->lastUsedDialogDirectory( "GEOMECH_MODEL" );
-    QStringList fileNames  = RiuFileDialogTools::getOpenFileNames( nullptr,
-                                                                  "Import Geo-Mechanical Model",
-                                                                  defaultDir,
-                                                                  "Abaqus results (*.odb);;Abaqus input file (*.inp)" );
+    QStringList fileNames  = RiuFileDialogTools::getOpenFileNames( nullptr, "Import Geo-Mechanical Model", defaultDir, filterStr );
     if ( !fileNames.empty() ) defaultDir = QFileInfo( fileNames.last() ).absolutePath();
     app->setLastUsedDialogDirectory( "GEOMECH_MODEL", defaultDir );
 

ApplicationLibCode/Commands/GeoMechCommands/RicImportGeoMechCaseTimeStepFilterFeature.cpp

@@ -36,9 +36,14 @@ void RicImportGeoMechCaseTimeStepFilterFeature::onActionTriggered( bool isChecke
 {
     RiaApplication* app = RiaApplication::instance();
 
+    QString filterStr;
+#if USE_ODB_API
+    filterStr += "Abaqus results (*.odb);;";
+#endif
+    filterStr += "Abaqus input file (*.inp)";
+
     QString     defaultDir = app->lastUsedDialogDirectory( "GEOMECH_MODEL" );
-    QStringList fileNames =
-        RiuFileDialogTools::getOpenFileNames( nullptr, "Import Geo-Mechanical Model", defaultDir, "Abaqus results (*.odb)" );
+    QStringList fileNames  = RiuFileDialogTools::getOpenFileNames( nullptr, "Import Geo-Mechanical Model", defaultDir, filterStr );
     if ( !fileNames.empty() ) defaultDir = QFileInfo( fileNames.last() ).absolutePath();
     for ( QString fileName : fileNames )
     {

ApplicationLibCode/GeoMech/GeoMechDataModel/RigFemPartResultsCollection.cpp

@@ -73,10 +73,6 @@
 
 #include "Riu3DMainWindowTools.h"
 
-#ifdef USE_ODB_API
-#include "RifOdbReader.h"
-#endif
-
 #include "cafProgressInfo.h"
 #include "cafTensor3.h"
 
@@ -159,6 +155,11 @@ RigFemPartResultsCollection::RigFemPartResultsCollection( RifGeoMechReaderInterf
 
     m_waterDensityShearSlipIndicator = 1.03;
 
+    m_fractureGradientCalculationTypeMudWeightWindow = RimMudWeightWindowParameters::FractureGradientCalculationType::DERIVED_FROM_K0FG;
+    m_lowerLimitParameterMudWeightWindow             = RimMudWeightWindowParameters::LowerLimitType::PORE_PRESSURE;
+    m_upperLimitParameterMudWeightWindow             = RimMudWeightWindowParameters::UpperLimitType::FG;
+    m_nonReservoirPorePressureTypeMudWeightWindow    = RimMudWeightWindowParameters::NonReservoirPorePressureType::PER_ELEMENT;
+
     m_resultCalculators.push_back( std::unique_ptr<RigFemPartResultCalculator>( new RigFemPartResultCalculatorTimeLapse( *this ) ) );
     m_resultCalculators.push_back( std::unique_ptr<RigFemPartResultCalculator>( new RigFemPartResultCalculatorSurfaceAngles( *this ) ) );
     m_resultCalculators.push_back( std::unique_ptr<RigFemPartResultCalculator>( new RigFemPartResultCalculatorSurfaceAlignedStress( *this ) ) );

ApplicationLibCode/GeoMech/GeoMechDataModel/RigGeoMechCaseData.cpp

@@ -25,8 +25,8 @@
 #include "RigFemPartResultsCollection.h"
 #include "RigGeoMechCaseData.h"
 
-#ifdef USE_ODB_API
 #include "RifInpReader.h"
+#ifdef USE_ODB_API
 #include "RifOdbReader.h"
 #endif
 
@@ -86,19 +86,23 @@ RigFemPartResultsCollection* RigGeoMechCaseData::femPartResults()
     return m_femPartResultsColl.p();
 }
 
+#include "RiaStdStringTools.h"
+
 //--------------------------------------------------------------------------------------------------
 ///
 //--------------------------------------------------------------------------------------------------
 bool RigGeoMechCaseData::open( std::string* errorMessage )
 {
-#ifdef USE_ODB_API
-    if ( m_geoMechCaseFileName.ends_with( ".odb" ) )
+    auto filename = RiaStdStringTools::toUpper( m_geoMechCaseFileName );
+
+    if ( filename.ends_with( ".INP" ) )
     {
-        m_readerInterface = new RifOdbReader;
+        m_readerInterface = new RifInpReader();
     }
-    else
+#ifdef USE_ODB_API
+    else if ( filename.ends_with( ".ODB" ) )
     {
-        m_readerInterface = new RifInpReader;
+        m_readerInterface = new RifOdbReader();
     }
 #endif
 
@@ -111,13 +115,11 @@ bool RigGeoMechCaseData::open( std::string* errorMessage )
 bool RigGeoMechCaseData::readTimeSteps( std::string* errorMessage, std::vector<std::string>* stepNames )
 {
     CVF_ASSERT( stepNames );
-#ifdef USE_ODB_API
     if ( m_readerInterface.notNull() && m_readerInterface->isOpen() )
     {
         *stepNames = m_readerInterface->allStepNames();
         return true;
     }
-#endif
     *errorMessage = std::string( "Could not read time steps" );
     return false;
 }
@@ -128,7 +130,7 @@ bool RigGeoMechCaseData::readTimeSteps( std::string* errorMessage, std::vector<s
 bool RigGeoMechCaseData::readFemParts( std::string* errorMessage, const std::vector<size_t>& timeStepFilter, bool readOnlyLastFrame )
 {
     CVF_ASSERT( errorMessage );
-#ifdef USE_ODB_API
+
     if ( m_readerInterface.notNull() && m_readerInterface->isOpen() )
     {
         m_readerInterface->setTimeStepFilter( timeStepFilter, readOnlyLastFrame );
@@ -154,7 +156,7 @@ bool RigGeoMechCaseData::readFemParts( std::string* errorMessage, const std::vec
             return true;
         }
     }
-#endif
+
     *errorMessage = std::string( "Could not read FEM parts" );
     return false;
 }
@@ -165,14 +167,13 @@ bool RigGeoMechCaseData::readFemParts( std::string* errorMessage, const std::vec
 bool RigGeoMechCaseData::readDisplacements( std::string* errorMessage, int partId, int timeStep, int frameIndex, std::vector<cvf::Vec3f>* displacements )
 {
     CVF_ASSERT( errorMessage );
-#ifdef USE_ODB_API
+
     if ( m_readerInterface.notNull() && m_readerInterface->isOpen() )
     {
         m_readerInterface->readDisplacements( partId, timeStep, frameIndex, displacements );
         return true;
     }
 
-#endif
     *errorMessage = std::string( "Could not read displacements." );
     return false;
 }

ApplicationLibCode/GeoMech/GeoMechFileInterface/CMakeLists.txt

@@ -0,0 +1,21 @@
+project(RifGeoMechFileInterface)
+
+# Unity Build
+if(RESINSIGHT_ENABLE_UNITY_BUILD)
+  message("Cmake Unity build is enabled on : ${PROJECT_NAME}")
+  set(CMAKE_UNITY_BUILD true)
+endif()
+
+add_library(
+  ${PROJECT_NAME}
+  RifInpReader.h RifInpReader.cpp RifGeoMechReaderInterface.h
+  RifGeoMechReaderInterface.cpp RifInpIncludeReader.h RifInpIncludeReader.cpp
+)
+
+target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+
+set(LINK_LIBRARIES RigGeoMechDataModel LibCore)
+
+target_link_libraries(${PROJECT_NAME} ${LINK_LIBRARIES})
+
+source_group("" FILES ${PROJECT_FILES})

ApplicationLibCode/GeoMech/OdbReader/RifInpReader.cpp → ApplicationLibCode/GeoMech/GeoMechFileInterface/RifInpReader.cpp

@@ -114,7 +114,7 @@ bool RifInpReader::readFemParts( RigFemPartCollection* femParts )
 
     auto elementType = read( m_stream, parts, nodes, elements, elementSets, m_stepNames, m_enableIncludes, m_includeEntries );
 
-    for ( int i = 0; i < m_includeEntries.size(); i++ )
+    for ( int i = 0; i < (int)m_includeEntries.size(); i++ )
     {
         m_includeEntries[i].fileName = ( m_inputPath / m_includeEntries[i].fileName ).string();
     }
@@ -590,7 +590,7 @@ int RifInpReader::frameCount( int stepIndex ) const
 //--------------------------------------------------------------------------------------------------
 std::vector<std::string> RifInpReader::elementSetNames( int partIndex, std::string partName )
 {
-    if ( partIndex >= m_partElementSetNames.size() ) return {};
+    if ( partIndex >= (int)m_partElementSetNames.size() ) return {};
     return m_partElementSetNames.at( partIndex );
 }
 

ApplicationLibCode/GeoMech/OdbReader/CMakeLists.txt

@@ -32,18 +32,7 @@ else()
   add_definitions(-DABQ_MPI_PMPI)
 endif(MSVC)
 
-add_library(
-  ${PROJECT_NAME}
-  RifOdbReader.h
-  RifOdbReader.cpp
-  RifInpReader.h
-  RifInpReader.cpp
-  RifGeoMechReaderInterface.h
-  RifGeoMechReaderInterface.cpp
-  RifInpIncludeReader.h
-  RifInpIncludeReader.cpp
-  OdbSetup.cmake
-)
+add_library(${PROJECT_NAME} RifOdbReader.h RifOdbReader.cpp OdbSetup.cmake)
 
 target_include_directories(
   ${PROJECT_NAME} PRIVATE ${RESINSIGHT_ODB_API_DIR}/include
@@ -88,7 +77,8 @@ endif(MSVC)
 target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
 
 target_link_libraries(
-  ${PROJECT_NAME} ${RI_ODB_LIBS} RigGeoMechDataModel LibCore
+  ${PROJECT_NAME} ${RI_ODB_LIBS} RigGeoMechDataModel RifGeoMechFileInterface
+  LibCore
 )
 
 source_group("" FILES ${PROJECT_FILES})

ApplicationLibCode/GeoMech/OdbReader_UnitTests/CMakeLists.txt

@@ -1,5 +1,3 @@
-cmake_minimum_required(VERSION 2.8)
-
 project(OdbReader_UnitTests)
 
 set(RI_VIZ_FWK_ROOT
@@ -21,12 +19,14 @@ add_subdirectory(${RI_VIZ_FWK_ROOT}/LibCore buildVizFwk)
 add_subdirectory(../../ResultStatisticsCache buildResultStatisticsCache)
 add_subdirectory(../OdbReader buildOdbReader)
 add_subdirectory(../GeoMechDataModel buildGeoMechDataModel)
+add_subdirectory(../GeoMechFileInterface buildGeoMechFileInterface)
 
 add_definitions(-DTEST_FILE="${RI_TEST_FILE}")
 
 include_directories(${RI_VIZ_FWK_ROOT}/LibCore)
 include_directories(../../ResultStatisticsCache)
 include_directories(../../ReservoirDataModel)
+include_directories(../GeoMechFileInterface)
 include_directories(../OdbReader)
 include_directories(../GeoMechDataModel)
 include_directories(${RI_GTEST_ROOT})
@@ -36,6 +36,6 @@ set(UNIT_TEST_CPP_SOURCES main.cpp RifOdbReader-Test.cpp
 )
 
 add_executable(${PROJECT_NAME} ${UNIT_TEST_CPP_SOURCES})
-target_link_libraries(${PROJECT_NAME} RifOdbReader)
+target_link_libraries(${PROJECT_NAME} RifOdbReader RifGeoMechFileInterface)
 
 include(../OdbReader/OdbSetup.cmake)

ApplicationLibCode/UserInterface/RiuMainWindow.cpp

@@ -571,15 +571,14 @@ void RiuMainWindow::createToolBars()
         toolbar->addAction( cmdFeatureMgr->action( "RicImportEnsembleFeature" ) );
         toolbar->hide();
     }
+
     {
-#ifdef USE_ODB_API
         QToolBar* toolbar = addToolBar( tr( "Import GeoMech" ) );
         toolbar->setObjectName( toolbar->windowTitle() );
         toolbar->addAction( cmdFeatureMgr->action( "RicImportGeoMechCaseFeature" ) );
         toolbar->addAction( cmdFeatureMgr->action( "RicImportGeoMechCaseTimeStepFilterFeature" ) );
         toolbar->addAction( cmdFeatureMgr->action( "RicImportElementPropertyFeature" ) );
         toolbar->hide();
-#endif
     }
 
     {

ApplicationLibCode/UserInterface/RiuMenuBarBuildTools.cpp

@@ -129,13 +129,11 @@ void RiuMenuBarBuildTools::addImportMenuWithActions( QObject* parent, QMenu* men
     importSummaryMenu->addAction( cmdFeatureMgr->action( "RicImportSummaryGroupFeature" ) );
     importSummaryMenu->addAction( cmdFeatureMgr->action( "RicImportEnsembleFeature" ) );
 
-#ifdef USE_ODB_API
     importMenu->addSeparator();
     QMenu* importGeoMechMenu = importMenu->addMenu( QIcon( ":/GeoMechCase24x24.png" ), "Geo Mechanical Cases" );
     importGeoMechMenu->addAction( cmdFeatureMgr->action( "RicImportGeoMechCaseFeature" ) );
     importGeoMechMenu->addAction( cmdFeatureMgr->action( "RicImportGeoMechCaseTimeStepFilterFeature" ) );
     importGeoMechMenu->addAction( cmdFeatureMgr->action( "RicImportElementPropertyFeature" ) );
-#endif
 
     importMenu->addSeparator();
     QMenu* importWellMenu = importMenu->addMenu( QIcon( ":/Well.svg" ), "Well Data" );

CMakeLists.txt

@@ -907,6 +907,7 @@ add_subdirectory(ApplicationLibCode)
 add_subdirectory(ApplicationLibCode/Commands)
 add_subdirectory(ApplicationLibCode/ResultStatisticsCache)
 add_subdirectory(ApplicationLibCode/GeoMech/GeoMechDataModel)
+add_subdirectory(ApplicationLibCode/GeoMech/GeoMechFileInterface)
 if(RESINSIGHT_USE_ODB_API)
   add_subdirectory(ApplicationLibCode/GeoMech/OdbReader)
 endif()
@@ -941,8 +942,13 @@ if(MSVC AND RESINSIGHT_ENABLE_STATIC_ANALYSIS)
   )
 
   set(TARGETS_FOR_STATIC_ANALYSIS
-      ${APP_FWK_LIBRARIES} ${APP_FWK_TEST_PROJECTS} ApplicationLibCode Commands
-      ResultStatisticsCache RigGeoMechDataModel
+      ${APP_FWK_LIBRARIES}
+      ${APP_FWK_TEST_PROJECTS}
+      ApplicationLibCode
+      Commands
+      ResultStatisticsCache
+      RigGeoMechDataModel
+      RifGeoMechFileInterface
   )
 
   foreach(TARGET_PROJECT ${TARGETS_FOR_STATIC_ANALYSIS})