feat(ProTubeVR): add proof-of-concept sketch

examples/poc-protubevr-compat/poc-protubevr-compat.ino

@@ -0,0 +1,108 @@
+#include "BluetoothSerial.h"
+
+#define PIN_RUMBLE 32
+#define CHA_RUMBLE 1
+
+#define PIN_KICK 33
+#define CHA_KICK 2
+
+const int freq = 60;
+const int resolution = 8;
+
+constexpr inline const bool checkSN(const uint32_t sn) {
+  return (sn % 48991) % 521 == 0;
+}
+
+const uint32_t generateSN(const uint32_t i) {
+  // TODO: I'm to lazy to write it normally, and since it is invoked only once on boot it is OK
+  uint32_t sn = i;
+  while (!checkSN(sn)) sn++;
+  return sn;
+}
+
+#if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED)
+#error Bluetooth is not enabled! Please run `make menuconfig` to and enable it
+#endif
+
+BluetoothSerial SerialBT;
+
+template<typename _Tp>
+constexpr inline _Tp simpleMap(_Tp x, _Tp in_max, _Tp out_max) {
+  return x * out_max / in_max;
+}
+
+void btCallback(esp_spp_cb_event_t event, esp_spp_cb_param_t *param) {
+  Serial.printf("BT Callback: %d\n", event);
+}
+
+void setup() {
+  Serial.begin(115200);
+
+  uint64_t chipId = ESP.getEfuseMac();
+  const uint32_t sn = generateSN(chipId);
+
+  Serial.printf("ESP32 Chip model = %s Rev %d\n", ESP.getChipModel(), ESP.getChipRevision());
+  Serial.printf("Chip ID: %u\n", chipId);
+  Serial.printf("SN: %u\n", sn);
+
+  char deviceName[64];
+  sprintf(deviceName, "ForceTubeVR %u", sn);
+  // TODO: fix not working name
+  // SerialBT.begin(deviceName);  // Bluetooth device name
+  SerialBT.begin("ForceTubeVR 1035102167");
+  Serial.println("The device started, now you can pair it with bluetooth!");
+
+  pinMode(PIN_RUMBLE, OUTPUT);
+  pinMode(PIN_KICK, OUTPUT);
+
+  ledcSetup(CHA_RUMBLE, freq, resolution);
+  ledcAttachPin(PIN_RUMBLE, CHA_RUMBLE);
+
+  ledcSetup(CHA_KICK, freq, resolution);
+  ledcAttachPin(PIN_KICK, CHA_KICK);
+
+  SerialBT.register_callback(btCallback);
+}
+
+#define COMMAND_START 0x2a
+#define MAGIC 0xb0
+#define CHANNEL_KICK 0x00
+#define CHANNEL_RUMBLE 0x01
+
+uint8_t payload[4];
+
+void loop() {
+  if (!SerialBT.available()) {
+    return;
+  }
+
+  size_t s = SerialBT.readBytes(payload, 4);
+  if (s == 0) return;
+
+  Serial.printf("%03u %03u %03u %03u", payload[0], payload[1], payload[2], payload[3]);
+
+  if (payload[0] != COMMAND_START) {
+    Serial.println(" !!! not starting with COMMAND_START");
+    return;
+  }
+  switch (payload[1]) {
+    case MAGIC:
+      if (payload[2] == CHANNEL_KICK) {
+        uint16_t val = simpleMap<uint16_t>(payload[3], 255, 1 << resolution);
+        Serial.printf(" - kick %03u", val);
+        if (val == 0) {
+          delay(100);
+        }
+        ledcWrite(CHA_KICK, val);
+      } else if (payload[2] == CHANNEL_RUMBLE) {
+        uint16_t val = simpleMap<uint16_t>(payload[3], 255, 1 << resolution);
+        ledcWrite(CHA_RUMBLE, val);
+        Serial.printf(" - rumble %03u", val);
+      } else Serial.print(" - unknown effect");
+      break;
+    default:
+      Serial.println(" !!! Unknown 2nd value, not MAGIC");
+      break;
+  }
+  Serial.println();
+}