pandoc-tex-numbering

This is an all-in-one pandoc filter especially for LaTeX files to keep numbering, hyperlinks, caption prefixs and cross references in (maybe multi-line) equations, sections, figures, and tables.

With pandoc-tex-numbering, you can convert your LaTeX source codes to any format pandoc supported, especially .docx, while keep all your auto-numberings and cross references.

What do we support?

Multi-line Equations: Multi-line equations in LaTeX math block such as align, cases can be numbered line by line. \nonumber commands are supported to turn off the numbering of a specific line.
cleveref Package: cref and Cref commands are supported. You can customize the prefix of the references.
Subfigures: subcaption package is supported. Subfigures can be numbered with customized symbols and formats.
Non-Arabic Numbers: Chinese numbers "第一章", "第二节" etc. are supported. You can customize the numbering format.
Custom List of Figures and Tables: Short captions as well as custom lof/lot titles are supported for figures and tables.

Installation

First, install pandoc and python3 if you haven't. Then you can install the filter via one of the following methods:

From PyPI (Recommended)

In Python>=3.8 pandoc-tex-numbering can be installed via pip:

pip install pandoc-tex-numbering

From Source

Only in case you want to use the filter with a lower version of Python (under 3.8), you can download the source code (i.e. all files under src/pandoc_tex_numbering) manually and put it in the same directory as your source file. In this case, when using the filter, you should specify the filter file via -F pandoc-tex-numbering.py instead of -F pandoc-tex-numbering.

Quick Start

Take .docx as an example:

pandoc -F pandoc-tex-numbering -o output.docx input.tex

Customization

You can set the following variables in the metadata of your LaTeX file to customize the behavior of the filter:

General

number-figures: Whether to number the figures. Default is true.
number-tables: Whether to number the tables. Default is true.
number-equations: Whether to number the equations. Default is true.
number-sections: Whether to number the sections. Default is true.
number-reset-level: The level of the section that will reset the numbering. Default is 1. For example, if the value is 2, the numbering will be reset at every second-level section and shown as "1.1.1", "3.2.1" etc.
data-export-path: Where to export the filter data. Default is None, which means no data will be exported. If set, the data will be exported to the specified path in the JSON format. This is useful for further usage of the filter data in other scripts or filter-debugging.
auto-labelling: Whether to automatically add identifiers (labels) to figures and tables without labels. Default is true. This has no effect on the output appearance but can be useful for cross-referencing in the future (for example, in the .docx output this will ensure that all your figures and tables have a unique auto-generated bookmark).

Equations

multiline-environments: Possible multiline environment names separated by commas. Default is "cases,align,aligned,gather,multline,flalign". The equations under these environments will be numbered line by line.

`cleveref` Support

Currently, pandoc's default LaTeX reader does not support \crefname and \Crefname commands (they are not visible in the AST for filters). To support cleveref package, you can set the following metadata:

figure-prefix: The prefix of the figure reference. Default is "Figure".
table-prefix: The prefix of the table reference. Default is "Table".
equation-prefix: The prefix of the equation reference. Default is "Equation".
section-prefix: The prefix of the section reference. Default is "Section".
prefix-space: Whether to add a space between the prefix and the number. Default is true (for some languages, the space may not be needed).

Note: multiple references are not supported currently. Try to use Figures \ref{fig:1} and \ref{fig:2} instead of \cref{fig:1,fig:2} for now.

Custom Section Numbering Format

For the section numbering, you can customize the format of the section numbering added at the beginning of the section titles and used in the references. The following metadata are used. For more details, see the Details of Sections section.

section-format-source-1, section-format-source-2,...: The format of the section numbering at each level. Default is "{h1}", "{h1}.{h2}" etc.
section-format-ref-1, section-format-ref-2,...: The format of the section numbering used in the references. If set, this will override the section-prefix metadata. Default is "{h1}", "{h1}.{h2}", etc. combined with the section-prefix and prefix-space metadata.

Subfigure Support

You can use the subcaption package to create subfigures. The filter will automatically number the subfigures. You can customize the subfigure numbering by setting the following metadata:

subfigure-symbols: The symbols used for subfigure numbering. Default is "abcdefghijklmnopqrstuvwxyz". The symbols will be used in the order specified. You must ensure that the number of symbols is greater than or equal to the number of subfigures in a figure.
subfigure-format: The format of the subfigures used in captions and references. This is a python f-string format similar to the section numbering format. Default is "{sym}". The available fields are sym and num. sym is the symbol of the subfigure and num is the number of the subfigure. For example, if you set subfigure-format="({sym})"(i.e. parentheses around the symbol), the subfigures will be shown as "(a)", "(b)" etc. in the captions and references.

List of Figures and Tables

To support short captions and custom titles in the list of figures and tables, you can set the following metadata to turn on the custom list of figures and tables:

custom-lof: Whether to use a custom list of figures. Default is false.
custom-lot: Whether to use a custom list of tables. Default is false.

You can customize the list of figures and tables by setting the following metadata:

lof-title: The title of the list of figures. Default is "List of Figures".
lot-title: The title of the list of tables. Default is "List of Tables".
list-leader-type: The type of leader used in the list of figures and tables (placeholders between the caption and the page number). Default is "dots". Possible values are "dot", "hyphen", "underscore", "middleDot" and "none".

For more details, see the List of Figures and Tables section.

Caption Renaming

The figure-prefix and table-prefix metadata are also used to rename the captions of figures and tables (but they are not used in subfigures and subtables).

Details

Equations

If metadata number-equations is set to true, all the equations will be numbered. The numbers are added at the end of the equations and the references to the equations are replaced by their numbers.

Equations under multiline environments (specified by metadata multiline-environments ) such as align, cases etc. are numbered line by line, and the others are numbered as a whole block.

That is to say, if you want the filter to number multiline equations line by line, use align, cases etc. environments directly. If you want the filter to number the whole block as a whole, use split, aligned etc. environments in the equation environment. In multiline environments, \nonumber commands are supported to turn off the numbering of a specific line.

For example, as shown in test_data/test.tex:

\begin{equation}
    \begin{aligned}
        f(x) &= x^2 + 2x + 1 \\
        g(x) &= \sin(x)
    \end{aligned}
    \label{eq:quadratic}
\end{equation}

This equation will be numbered as a whole block, say, (1.1), while:

\begin{align}
    a &= b + c \label{eq:align1} \\
    d &= e - f \label{eq:align2} \\
    g &= h \nonumber \\
    i &= j + k \label{eq:align3}
\end{align}

This equation will be numbered line by line, say, (1.2), (1.3) and (1.4), while the third line will not be numbered.

NOTE: the pandoc filters have no access to the difference of align and align* environments. Therefore, you CANNOT turn off the numbering of a specific align environment via the * mark. If you do want to turn off the numbering of a specific align environment, a temporary solution is to manually add \nonumber commands to every line of the environment. This may be fixed by a custom lua reader to keep those information in the future.

Sections

If metadata number-sections is set to true, all the sections will be numbered. The numbers are added at the beginning of the section titles and the references to the sections are replaced by their numbers.

You can customize the format of the section numbering added at the beginning of the section titles and used in the references by setting the metadata section-format-source-1, section-format-source-2, etc. and section-format-ref-1, section-format-ref-2, etc. All of these metadata accept a python f-string format with fields h1, h2, ..., h10 representing the numbers of each level headers.

For example, to add a prefix "Chapter" and a suffix "." to the first-level section, you can set section-format-source-1 to "Chapter {h1}.". At the beginning of the first-level section, it will be shown as "Chapter 1.". And if you also want to add the prefix "Chapter" to the references, but without the suffix ".", you can set section-format-ref-1 to "Chapter {h1}". Then, when a first-level section is referred to, it will be shown as "Chapter 1".

The default values of section-format-source-1, section-format-source-2, etc. are in fact {h1}, {h1}.{h2}, etc. respectively, and the default values of section-format-ref-1, section-format-ref-2, etc. are in fact {h1}, {h1}.{h2} combined with the section-prefix and prefix-space metadata respectively.

Sometimes, non arabic numberings are needed. For example, in Chinese, with section-format-source-1="第{h1}章", the users get "第1章", "第2章" etc. However, sometimes the users may need "第一章", "第二章" etc. To achieve this, we also support non arabic numbers by series of non-arabic fields. For example, when {h1} is 12, the Chinese number field {h1_zh} will be "十二".

Note that: The current version only supports simplified Chinese numbers. If you need other languages, you can modify the lang_num.py file. See the Custom Non-Arabic Numbers Support section for more details.

Figures and Tables

All the figures and tables are supported. All references to figures and tables are replaced by their numbers, and all the captions are added prefixs such as "Figure 1.1: ".

You can determine the prefix of figures and tables by changing the variables figure-prefix and table-prefix in the metadata, default values are "Figure" and "Table" respectively.

All figures and captions without captions will be also added a caption like "Figure 1.1" or "Table 1.1" (without the colon).

List of Figures and Tables

Currently, this feature is only available for docx output with Python>=3.8.

If you set the metadata custom-lof and custom-lot to true, the filter will generate a custom list of figures and tables.

The captions used in the list of figures and tables are the short captions if they are defined in the LaTeX source code. If not, the full captions are used. The short captions are defined in the LaTeX source code as \caption[short caption]{full caption}.

The list of figures and tables will be put at the beginning of the document by default. If you want to put the lists at posistions where the \listoffigures and \listoftables commands are found in the LaTeX source code, you should pass -f latex+raw_tex to the pandoc command. However, currently, -f latex+raw_tex does NOT work if you're using subfiles package..

Data Export

If you set the metadata data-export-path to a path, the filter will export the filter data to the specified path in the JSON format. This is useful for further usage of the filter data in other scripts or filter debugging. The output data is a dictionary with identifiers (labels) as keys and the corresponding data as values.

All kinds of identifiers have the following common keys: num: str and type: Literal["fig", "tab", "eq", "sec"]. For sections, there is an additional key level: int representing the level of the section. For tables and figures, there is additional keys caption: str and short_caption: str representing the full caption and the short caption defined in the LaTeX source code.

Note: currently, short captions defined via \caption[short caption]{full caption} are not supported for docx output, but the filter will export them for your further usage.

Log

Some warning message will be shown in the log file named pandoc-tex-numbering.log in the same directory as the output file. You can check this file if you encounter any problems or report those messages in the issues.

`org` file support

org files are supported by adding an additional lua filter src\org_helper.lua to the pandoc command. The usage is as follows:

pandoc --lua-filter org_helper.lua --filter pandoc-tex-numbering.py input.org -o output.docx

Be sure to use --lua-filter org_helper.lua before --filter pandoc-tex-numbering.py.

Reason for this is the default org reader of pandoc does not parse LaTeX codes by default, for example, LaTeX equations in equation environments and cross references via \ref{} macros are parsed as RawBlock and RawInline nodes, while we desire Math nodes and Link nodes respectively. The org_helper.lua filter helps read these blocks via latex reader and after that, the pandoc-tex-numbering.py filter can work as expected.

Related discussions can also be found in pandoc issue #1764 (codes in org_helper.lua are based on comments from @tarleb in this issue) and pandoc-tex-numbering issue #1.

Examples

With the testing file tests/test.tex:

Default Metadata

pandoc -o output.docx -F pandoc-tex-numbering test.tex

The results are shown as follows:

$alt text$ $alt text$

Customized Metadata

In the following example, we custom the following (maybe silly) items only for the purpose of demonstration:

Use all prefixes as "Fig", "Tab", "Eq" respectively.
Reset the numbering at the second level sections, such that the numbering will be shown as "1.1.1", "3.2.1" etc.
At the beginning of sections, use Chinese numbers "第一章" for the first level sections and English numbers "Section 1.1" for the second level sections.
When referred to, use, in turn, "Chapter 1", "第1.1节" etc.
For subfigures, use greek letters combined with arabic numbers and replace the parentheses with square brackets, such that the subfigures will be shown as "[α1]", "[β2]" etc.
Turn on custom list of figures and tables and:
- Use custom titles as "图片目录" and "Table Lists" respectively.
- Use hyphens as the leader in the lists.

Run the following command with corresponding metadata in a metadata.yaml file (recommended):

pandoc -o output.docx -F pandoc-tex-numbering --metadata-file test.yaml -f latex+raw_tex test.tex

# test.yaml
figure-prefix: Fig
table-prefix: Tab
equation-prefix: Eq
number-reset-level: 2
non-arabic-numbers: true
section-format-source-1: "第{h1_zh}章"
section-format-source-2: "Section {h1}.{h2}."
section-format-ref-1: "Chapter {h1}"
section-format-ref-2: "第{h1}.{h2}节"
subfigure-format: "[{sym}({num})]"
subfigure-symbols: "αβγδεζηθικλμνξοπρστυφχψω"
custom-lot: true
custom-lof: true
lot-title: "Table List"
lof-title: "图片目录"
list-leader-type: "hyphen"

The results are shown as follows: $alt text$ $alt text$

Development

Custom Non-Arabic Numbers Support

Currently, the filter supports only Chinese non-arabic numbers. If you want to support other languages, you can modify the lang_num.py file. For example, if you want to support the non-arabic numbers in the language foo, you can:

Define a new function arabic2foo(num:int)->str that converts the arabic number to the corresponding non-arabic number.
Add the function to the language_functions dictionary with the corresponding language name as the key, for example {"foo":arabic2foo}.

Then you can set the metadata section-format-1="Chapter {h1_foo}." to enable the non-arabic numbers in the filter.

Custom Numbering Format

To keep the design of the filter simple and easy to use, the filter only supports a limited number of numbering formats. However, complex formats can easily be extended by modifying the logic in the action_replace_refs function.

Extend the Filter

The logical structure of the filter is quiet straightforward. You can see this filter as a scaffold for your own filter. For example, _parse_multiline_environment function receives a latex math node and the doc object and returns a new modified math string with the numbering and respective labels. You can add your customized latex syntax analysis logic to support more complicated circumstances.

It is recommended to decalre all your possible variables in the prepare function, and save them in the doc.pandoc_tex_numbering:dict object. This object will be automatically destroyed after the filter is executed.

Advanced docx Support

In oxml.py, I added a built-in framework to support high-level OOXML operations. If you're familiar with OOXML, you can utilize this framework to embed OOXML codes directly into the output (into RawBlock nodes with openxml format).

FAQ

Q: Can the filter work with xxx package?
A: It depends. If the package is supported by pandoc, then it should work. If not, you may need to a custom filter or reader to parse the LaTeX codes correctly. In the latter case, this is out of the scope of this filter. For example, the macro \ce in the mhchem package is not supported by pandoc, so we cannot parse the chemical equations correctly.
Q: Can the filter support complex caption macros such as \bicaption?
A: No for now. Caption macros such as \bicaption are not supported by the default latex reader of pandoc. Therefore, we cannot parse them correctly. You may need a custom reader to parse them correctly or modify the source code before using this filter.
Q: Can docx output support the short captions in the list of figures and tables?
A: Now supported.

That said, however, functionalities mentioned above can never be supported easily since they are not, and maybe never will be, supported by native pandoc framework.

TODO

There are some known issues and possible improvements:

Support multiple references in cleveref package.
Add empty caption for figures and tables without captions (currently, they have no caption and therefore links to them cannot be located).
Directly support align* and other non-numbered environments.
Subfigure support.
Support short captions in docx output.

Name		Name	Last commit message	Last commit date
Latest commit History 74 Commits
__pycache__		__pycache__
images		images
src		src
tests		tests
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
README.md		README.md
pyproject.toml		pyproject.toml

License

fncokg/pandoc-tex-numbering

Folders and files

Latest commit

History

Repository files navigation

pandoc-tex-numbering

Contents

What do we support?

Installation

From PyPI (Recommended)

From Source

Quick Start

Customization

General

Equations

cleveref Support

Custom Section Numbering Format

Subfigure Support

List of Figures and Tables

Caption Renaming

Details

Equations

Sections

Figures and Tables

List of Figures and Tables

Data Export

Log

org file support

Examples

Default Metadata

Customized Metadata

Development

Custom Non-Arabic Numbers Support

Custom Numbering Format

Extend the Filter

Advanced docx Support

FAQ

TODO

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 7

Packages 0

Languages

`cleveref` Support

`org` file support

Packages