diff --git a/Documentation/topics/dpdk/phy.rst b/Documentation/topics/dpdk/phy.rst
index f66b106c46a..41cc3588abf 100644
--- a/Documentation/topics/dpdk/phy.rst
+++ b/Documentation/topics/dpdk/phy.rst
@@ -198,7 +198,7 @@ Example::
a dedicated queue, it will be explicit::
$ ovs-vsctl get interface dpdk-p0 status
- {..., rx_steering=unsupported}
+ {..., rx-steering=unsupported}
More details can often be found in ``ovs-vswitchd.log``::
@@ -499,7 +499,7 @@ its options::
$ ovs-appctl dpctl/show
[...]
- port 3: dpdk-rep0 (dpdk: configured_rx_queues=1, ..., dpdk-vf-mac=00:11:22:33:44:55, ...)
+ port 3: dpdk-rep0 (dpdk: ..., dpdk-vf-mac=00:11:22:33:44:55, ...)
$ ovs-vsctl show
[...]
diff --git a/NEWS b/NEWS
index 6b45492f1b7..43aea97b5d2 100644
--- a/NEWS
+++ b/NEWS
@@ -6,6 +6,13 @@ Post-v3.2.0
from older version is supported but it may trigger more leader elections
during the process, and error logs complaining unrecognized fields may
be observed on old nodes.
+ - ovs-appctl:
+ * Output of 'dpctl/show' command no longer shows interface configuration
+ status, only values of the actual configuration options, a.k.a.
+ 'requested' configuration. The interface configuration status,
+ a.k.a. 'configured' values, can be found in the 'status' column of
+ the Interface table, i.e. with 'ovs-vsctl get interface <..> status'.
+ Reported names adjusted accordingly.
v3.2.0 - 17 Aug 2023
diff --git a/lib/netdev-dpdk.c b/lib/netdev-dpdk.c
index 55700250df2..29f2b280d49 100644
--- a/lib/netdev-dpdk.c
+++ b/lib/netdev-dpdk.c
@@ -1905,31 +1905,41 @@ netdev_dpdk_get_config(const struct netdev *netdev, struct smap *args)
ovs_mutex_lock(&dev->mutex);
- smap_add_format(args, "requested_rx_queues", "%d", dev->user_n_rxq);
- smap_add_format(args, "configured_rx_queues", "%d", netdev->n_rxq);
- smap_add_format(args, "requested_tx_queues", "%d", dev->requested_n_txq);
- smap_add_format(args, "configured_tx_queues", "%d", netdev->n_txq);
- smap_add_format(args, "mtu", "%d", dev->mtu);
+ if (dev->devargs && dev->devargs[0]) {
+ smap_add_format(args, "dpdk-devargs", "%s", dev->devargs);
+ }
- if (dev->type == DPDK_DEV_ETH) {
- smap_add_format(args, "n_rxq_desc", "%d", dev->rxq_size);
- smap_add_format(args, "n_txq_desc", "%d", dev->txq_size);
- if (dev->hw_ol_features & NETDEV_RX_CHECKSUM_OFFLOAD) {
- smap_add(args, "rx_csum_offload", "true");
- } else {
- smap_add(args, "rx_csum_offload", "false");
- }
- if (dev->rx_steer_flags == DPDK_RX_STEER_LACP) {
- smap_add(args, "rx-steering", "rss+lacp");
- }
- smap_add(args, "lsc_interrupt_mode",
- dev->lsc_interrupt_mode ? "true" : "false");
+ smap_add_format(args, "n_rxq", "%d", dev->user_n_rxq);
- if (dpdk_port_is_representor(dev)) {
- smap_add_format(args, "dpdk-vf-mac", ETH_ADDR_FMT,
- ETH_ADDR_ARGS(dev->requested_hwaddr));
- }
+ if (dev->fc_conf.mode == RTE_ETH_FC_TX_PAUSE ||
+ dev->fc_conf.mode == RTE_ETH_FC_FULL) {
+ smap_add(args, "rx-flow-ctrl", "true");
}
+
+ if (dev->fc_conf.mode == RTE_ETH_FC_RX_PAUSE ||
+ dev->fc_conf.mode == RTE_ETH_FC_FULL) {
+ smap_add(args, "tx-flow-ctrl", "true");
+ }
+
+ if (dev->fc_conf.autoneg) {
+ smap_add(args, "flow-ctrl-autoneg", "true");
+ }
+
+ smap_add_format(args, "n_rxq_desc", "%d", dev->rxq_size);
+ smap_add_format(args, "n_txq_desc", "%d", dev->txq_size);
+
+ if (dev->rx_steer_flags == DPDK_RX_STEER_LACP) {
+ smap_add(args, "rx-steering", "rss+lacp");
+ }
+
+ smap_add(args, "dpdk-lsc-interrupt",
+ dev->lsc_interrupt_mode ? "true" : "false");
+
+ if (dpdk_port_is_representor(dev)) {
+ smap_add_format(args, "dpdk-vf-mac", ETH_ADDR_FMT,
+ ETH_ADDR_ARGS(dev->requested_hwaddr));
+ }
+
ovs_mutex_unlock(&dev->mutex);
return 0;
@@ -2324,6 +2334,29 @@ netdev_dpdk_set_config(struct netdev *netdev, const struct smap *args,
return err;
}
+static int
+netdev_dpdk_vhost_client_get_config(const struct netdev *netdev,
+ struct smap *args)
+{
+ struct netdev_dpdk *dev = netdev_dpdk_cast(netdev);
+ int tx_retries_max;
+
+ ovs_mutex_lock(&dev->mutex);
+
+ if (dev->vhost_id) {
+ smap_add(args, "vhost-server-path", dev->vhost_id);
+ }
+
+ atomic_read_relaxed(&dev->vhost_tx_retries_max, &tx_retries_max);
+ if (tx_retries_max != VHOST_ENQ_RETRY_DEF) {
+ smap_add_format(args, "tx-retries-max", "%d", tx_retries_max);
+ }
+
+ ovs_mutex_unlock(&dev->mutex);
+
+ return 0;
+}
+
static int
netdev_dpdk_vhost_client_set_config(struct netdev *netdev,
const struct smap *args,
@@ -4091,6 +4124,9 @@ netdev_dpdk_vhost_user_get_status(const struct netdev *netdev,
smap_add_format(args, "userspace-tso", "disabled");
}
+ smap_add_format(args, "n_rxq", "%d", netdev->n_rxq);
+ smap_add_format(args, "n_txq", "%d", netdev->n_txq);
+
ovs_mutex_unlock(&dev->mutex);
return 0;
}
@@ -4161,6 +4197,13 @@ netdev_dpdk_get_status(const struct netdev *netdev, struct smap *args)
smap_add_format(args, "max_vfs", "%u", dev_info.max_vfs);
smap_add_format(args, "max_vmdq_pools", "%u", dev_info.max_vmdq_pools);
+ smap_add_format(args, "n_rxq", "%d", netdev->n_rxq);
+ smap_add_format(args, "n_txq", "%d", netdev->n_txq);
+
+ smap_add(args, "rx_csum_offload",
+ dev->hw_ol_features & NETDEV_RX_CHECKSUM_OFFLOAD
+ ? "true" : "false");
+
/* Querying the DPDK library for iftype may be done in future, pending
* support; cf. RFC 3635 Section 3.2.4. */
enum { IF_TYPE_ETHERNETCSMACD = 6 };
@@ -4186,16 +4229,21 @@ netdev_dpdk_get_status(const struct netdev *netdev, struct smap *args)
ETH_ADDR_ARGS(dev->hwaddr));
}
- if (rx_steer_flags) {
- if (!rx_steer_flows_num) {
- smap_add(args, "rx_steering", "unsupported");
+ if (rx_steer_flags && !rx_steer_flows_num) {
+ smap_add(args, "rx-steering", "unsupported");
+ } else if (rx_steer_flags == DPDK_RX_STEER_LACP) {
+ smap_add(args, "rx-steering", "rss+lacp");
+ } else {
+ ovs_assert(!rx_steer_flags);
+ smap_add(args, "rx-steering", "rss");
+ }
+
+ if (rx_steer_flags && rx_steer_flows_num) {
+ smap_add_format(args, "rx_steering_queue", "%d", n_rxq - 1);
+ if (n_rxq > 2) {
+ smap_add_format(args, "rss_queues", "0-%d", n_rxq - 2);
} else {
- smap_add_format(args, "rx_steering_queue", "%d", n_rxq - 1);
- if (n_rxq > 2) {
- smap_add_format(args, "rss_queues", "0-%d", n_rxq - 2);
- } else {
- smap_add(args, "rss_queues", "0");
- }
+ smap_add(args, "rss_queues", "0");
}
}
@@ -6415,7 +6463,6 @@ parse_vhost_config(const struct smap *ovs_other_config)
.is_pmd = true, \
.alloc = netdev_dpdk_alloc, \
.dealloc = netdev_dpdk_dealloc, \
- .get_config = netdev_dpdk_get_config, \
.get_numa_id = netdev_dpdk_get_numa_id, \
.set_etheraddr = netdev_dpdk_set_etheraddr, \
.get_etheraddr = netdev_dpdk_get_etheraddr, \
@@ -6459,6 +6506,7 @@ static const struct netdev_class dpdk_class = {
.type = "dpdk",
NETDEV_DPDK_CLASS_BASE,
.construct = netdev_dpdk_construct,
+ .get_config = netdev_dpdk_get_config,
.set_config = netdev_dpdk_set_config,
.send = netdev_dpdk_eth_send,
};
@@ -6485,6 +6533,7 @@ static const struct netdev_class dpdk_vhost_client_class = {
.init = netdev_dpdk_vhost_class_init,
.construct = netdev_dpdk_vhost_client_construct,
.destruct = netdev_dpdk_vhost_destruct,
+ .get_config = netdev_dpdk_vhost_client_get_config,
.set_config = netdev_dpdk_vhost_client_set_config,
.send = netdev_dpdk_vhost_send,
.get_carrier = netdev_dpdk_vhost_get_carrier,
diff --git a/tests/system-dpdk.at b/tests/system-dpdk.at
index 0f58e857422..fd42aed0b38 100644
--- a/tests/system-dpdk.at
+++ b/tests/system-dpdk.at
@@ -588,8 +588,9 @@ AT_CHECK([ovs-vsctl show], [], [stdout])
sleep 2
dnl Check default MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=1500' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface phy0 mtu], [0], [dnl
+1500
+])
dnl Increase MTU value and check in the datapath
AT_CHECK([ovs-vsctl set Interface phy0 mtu_request=9000])
@@ -600,8 +601,9 @@ AT_FAIL_IF([grep "Interface phy0 does not support MTU configuration" ovs-vswitch
dnl Fail if error is encountered during MTU setup
AT_FAIL_IF([grep "Interface phy0 MTU (9000) setup error" ovs-vswitchd.log], [], [stdout])
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=9000' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface phy0 mtu], [0], [dnl
+9000
+])
dnl Clean up
@@ -636,14 +638,16 @@ dnl Fail if error is encountered during MTU setup
AT_FAIL_IF([grep "Interface phy0 MTU (9000) setup error" ovs-vswitchd.log], [], [stdout])
dnl Check MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=9000' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface phy0 mtu], [0], [dnl
+9000
+])
dnl Decrease MTU value and check in the datapath
AT_CHECK([ovs-vsctl set Interface phy0 mtu_request=2000])
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=2000' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface phy0 mtu], [0], [dnl
+2000
+])
dnl Clean up
@@ -686,16 +690,19 @@ tail -f /dev/null | dpdk-testpmd --socket-mem="$(cat NUMA_NODE)" --no-pci\
--single-file-segments -- -a >$OVS_RUNDIR/testpmd-dpdkvhostuserclient0.log 2>&1 &
OVS_WAIT_UNTIL([grep "virtio is now ready for processing" ovs-vswitchd.log])
+OVS_WAIT_UNTIL([ovs-vsctl get Interface dpdkvhostuserclient0 link_state | grep -w up])
dnl Check default MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=1500' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface dpdkvhostuserclient0 mtu], [0], [dnl
+1500
+])
dnl Increase MTU value and check in the datapath
AT_CHECK([ovs-vsctl set Interface dpdkvhostuserclient0 mtu_request=9000])
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=9000' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface dpdkvhostuserclient0 mtu], [0], [dnl
+9000
+])
dnl Clean up the testpmd now
pkill -f -x -9 'tail -f /dev/null'
@@ -743,16 +750,19 @@ tail -f /dev/null | dpdk-testpmd --socket-mem="$(cat NUMA_NODE)" --no-pci\
--single-file-segments -- -a >$OVS_RUNDIR/testpmd-dpdkvhostuserclient0.log 2>&1 &
OVS_WAIT_UNTIL([grep "virtio is now ready for processing" ovs-vswitchd.log])
+OVS_WAIT_UNTIL([ovs-vsctl get Interface dpdkvhostuserclient0 link_state | grep -w up])
dnl Check MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=9000' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface dpdkvhostuserclient0 mtu], [0], [dnl
+9000
+])
dnl Decrease MTU value and check in the datapath
AT_CHECK([ovs-vsctl set Interface dpdkvhostuserclient0 mtu_request=2000])
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=2000' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface dpdkvhostuserclient0 mtu], [0], [dnl
+2000
+])
dnl Clean up the testpmd now
pkill -f -x -9 'tail -f /dev/null'
@@ -789,8 +799,9 @@ dnl Fail if error is encountered during MTU setup
AT_FAIL_IF([grep "Interface phy0 MTU (9702) setup error" ovs-vswitchd.log], [], [stdout])
dnl Check MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=9702' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface phy0 mtu], [0], [dnl
+9702
+])
dnl Set MTU value above upper bound and check for error
AT_CHECK([ovs-vsctl set Interface phy0 mtu_request=9711])
@@ -830,8 +841,9 @@ dnl Fail if error is encountered during MTU setup
AT_FAIL_IF([grep "Interface phy0 MTU (68) setup error" ovs-vswitchd.log], [], [stdout])
dnl Check MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=68' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface phy0 mtu], [0], [dnl
+68
+])
dnl Set MTU value below lower bound and check for error
AT_CHECK([ovs-vsctl set Interface phy0 mtu_request=67])
@@ -877,10 +889,12 @@ tail -f /dev/null | dpdk-testpmd --socket-mem="$(cat NUMA_NODE)" --no-pci\
--single-file-segments -- -a >$OVS_RUNDIR/testpmd-dpdkvhostuserclient0.log 2>&1 &
OVS_WAIT_UNTIL([grep "virtio is now ready for processing" ovs-vswitchd.log])
+OVS_WAIT_UNTIL([ovs-vsctl get Interface dpdkvhostuserclient0 link_state | grep -w up])
dnl Check MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=9702' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface dpdkvhostuserclient0 mtu], [0], [dnl
+9702
+])
dnl Set MTU value above upper bound and check for error
AT_CHECK([ovs-vsctl set Interface dpdkvhostuserclient0 mtu_request=9711])
@@ -934,10 +948,12 @@ tail -f /dev/null | dpdk-testpmd --socket-mem="$(cat NUMA_NODE)" --no-pci\
--single-file-segments -- -a >$OVS_RUNDIR/testpmd-dpdkvhostuserclient0.log 2>&1 &
OVS_WAIT_UNTIL([grep "virtio is now ready for processing" ovs-vswitchd.log])
+OVS_WAIT_UNTIL([ovs-vsctl get Interface dpdkvhostuserclient0 link_state | grep -w up])
dnl Check MTU value in the datapath
-AT_CHECK([ovs-appctl dpctl/show], [], [stdout])
-AT_CHECK([grep -E 'mtu=68' stdout], [], [stdout])
+AT_CHECK([ovs-vsctl get Interface dpdkvhostuserclient0 mtu], [0], [dnl
+68
+])
dnl Set MTU value below lower bound and check for error
AT_CHECK([ovs-vsctl set Interface dpdkvhostuserclient0 mtu_request=67])
diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index 81f6e872e2c..68392ac41d7 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -3789,6 +3789,18 @@ ovs-vsctl add-port br0 p0 -- set Interface p0 type=patch options:peer=p1 \
Maximum number of VMDq pools.
+
+ Number of Rx queues.
+
+
+
+ Number of Tx queues.
+
+
+
+ Whether Rx Checksum offload is enabled or not.
+
+
Interface type ID according to IANA ifTYPE MIB definitions.
@@ -3807,7 +3819,7 @@ ovs-vsctl add-port br0 p0 -- set Interface p0 type=patch options:peer=p1 \
VF representors.
-
+
Hardware Rx queue steering policy in use.