diff --git a/inc/driver-models/Pressure.h b/inc/driver-models/Pressure.h
new file mode 100644
index 00000000..a30264fc
--- /dev/null
+++ b/inc/driver-models/Pressure.h
@@ -0,0 +1,166 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2017 Lancaster University.
+Copyright (c) 2018 Paul ADAM, Europe.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+#ifndef CODAL_PRESSURE_H
+#define CODAL_PRESSURE_H
+
+#include "CodalConfig.h"
+#include "CodalComponent.h"
+#include "Pin.h"
+#include "CodalUtil.h"
+
+/**
+  * Status flags
+  */
+#define PRESSURE_IMU_DATA_VALID               0x02
+
+/**
+  * Pressure events
+  */
+#define PRESSURE_EVT_DATA_UPDATE              1
+
+namespace codal
+{
+
+    /**
+     * Class definition for Pressure.
+     */
+    class Pressure : public CodalComponent
+    {
+        protected:
+
+        uint16_t        samplePeriod;       // The time between samples, in milliseconds.
+        uint8_t         sampleRange;        // The sample range.
+        uint16_t        sample;             // The last sample read.
+
+        public:
+
+        /**
+          * Constructor.
+          * Create a software abstraction of an humidity.
+          *
+           @param id the unique EventModel id of this component. Defaults to: DEVICE_ID_PRESSURE
+          *
+         */
+        Pressure(uint16_t id = DEVICE_ID_PRESSURE);
+
+        /**
+          * Attempts to set the sample rate of the humidity to the specified value (in ms).
+          *
+          * @param period the requested time between samples, in milliseconds.
+          * @return DEVICE_OK on success, DEVICE_I2C_ERROR is the request fails.
+          *
+          * @note The requested rate may not be possible on the hardware. In this case, the
+          * nearest lower rate is chosen.
+          *
+          * @note This method should be overriden (if supported) by specific humidity device drivers.
+          */
+        virtual int setPeriod(int period);
+
+        /**
+          * Reads the currently configured sample rate of the humidity.
+          *
+          * @return The time between samples, in milliseconds.
+          */
+        virtual int getPeriod();
+
+        /**
+          * Attempts to set the sample range of the humidity to the specified value (in dps).
+          *
+          * @param range The requested sample range of samples, in dps.
+          *
+          * @return DEVICE_OK on success, DEVICE_I2C_ERROR is the request fails.
+          *
+          * @note The requested range may not be possible on the hardware. In this case, the
+          * nearest lower range is chosen.
+          *
+          * @note This method should be overriden (if supported) by specific humidity device drivers.
+          */
+        virtual int setRange(int range);
+
+        /**
+          * Reads the currently configured sample range of the humidity.
+          *
+          * @return The sample range, in g.
+          */
+        virtual int getRange();
+
+        /**
+         * Configures the humidity for dps range and sample rate defined
+         * in this object. The nearest values are chosen to those defined
+         * that are supported by the hardware. The instance variables are then
+         * updated to reflect reality.
+         *
+         * @return DEVICE_OK on success, DEVICE_I2C_ERROR if the humidity could not be configured.
+         *
+         * @note This method should be overidden by the hardware driver to implement the requested
+         * changes in hardware.
+         */
+        virtual int configure();
+
+        /**
+         * Poll to see if new data is available from the hardware. If so, update it.
+         * n.b. it is not necessary to explicitly call this function to update data
+         * (it normally happens in the background when the scheduler is idle), but a check is performed
+         * if the user explicitly requests up to date data.
+         *
+         * @return DEVICE_OK on success, DEVICE_I2C_ERROR if the update fails.
+         *
+         * @note This method should be overidden by the hardware driver to implement the requested
+         * changes in hardware.
+         */
+        virtual int requestUpdate();
+
+        /**
+         * Stores data from the humidity sensor in our buffer, and perform gesture tracking.
+         *
+         * On first use, this member function will attempt to add this component to the
+         * list of fiber components in order to constantly update the values stored
+         * by this object.
+         *
+         * This lazy instantiation means that we do not
+         * obtain the overhead from non-chalantly adding this component to fiber components.
+         *
+         * @return DEVICE_OK on success, DEVICE_I2C_ERROR if the read request fails.
+         */
+        virtual int update(uint16_t s);
+
+        /**
+          * Reads the last humidity value stored, and in the coordinate system defined in the constructor.
+          * @return The force measured in each axis, in dps.
+          */
+        uint16_t getSample();
+
+        /**
+          * Destructor.
+          */
+        ~Pressure();
+
+        private:
+
+    };
+}
+
+#endif
diff --git a/source/driver-models/Pressure.cpp b/source/driver-models/Pressure.cpp
new file mode 100644
index 00000000..c872cda7
--- /dev/null
+++ b/source/driver-models/Pressure.cpp
@@ -0,0 +1,199 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2017 Lancaster University.
+Copyright (c) 2018 Paul ADAM, Europe.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+#include "Pressure.h"
+#include "ErrorNo.h"
+#include "Event.h"
+#include "CodalCompat.h"
+#include "CodalFiber.h"
+
+using namespace codal;
+
+
+/**
+  * Constructor.
+  * Create a software abstraction of a pressure sensor
+  *
+  * @param _i2c an instance of I2C used to communicate with the device.
+  *
+  * @param address the default I2C address of the pressure.
+  *
+ */
+Pressure::Pressure(uint16_t id) : sample()
+{
+    // Store our identifiers.
+    this->id = id;
+    this->status = 0;
+
+    // Set a default rate of 10Hz.
+    this->samplePeriod = 100;
+    this->sampleRange = 1;
+}
+
+/**
+  * Stores data from the pressure sensor in our buffer.
+  *
+  * On first use, this member function will attempt to add this component to the
+  * list of fiber components in order to constantly update the values stored
+  * by this object.
+  *
+  * This lazy instantiation means that we do not
+  * obtain the overhead from non-chalantly adding this component to fiber components.
+  *
+  * @return DEVICE_OK on success, DEVICE_I2C_ERROR if the read request fails.
+  */
+int Pressure::update(uint16_t s)
+{
+    // Indicate that pitch and roll data is now stale, and needs to be recalculated if needed.
+    status &= ~PRESSURE_IMU_DATA_VALID;
+
+    // Indicate that a new sample is available
+    Event e(id, PRESSURE_EVT_DATA_UPDATE);
+
+    return DEVICE_OK;
+};
+
+/**
+  * Attempts to set the sample rate of the pressure to the specified value (in ms).
+  *
+  * @param period the requested time between samples, in milliseconds.
+  *
+  * @return DEVICE_OK on success, DEVICE_I2C_ERROR is the request fails.
+  *
+  * @code
+  * // sample rate is now 20 ms.
+  * pressure.setPeriod(20);
+  * @endcode
+  *
+  * @note The requested rate may not be possible on the hardware. In this case, the
+  * nearest lower rate is chosen.
+  */
+int Pressure::setPeriod(int period)
+{
+    int result;
+
+    samplePeriod = period;
+    result = configure();
+
+    samplePeriod = getPeriod();
+    return result;
+
+}
+
+/**
+  * Reads the currently configured sample rate of the pressure.
+  *
+  * @return The time between samples, in milliseconds.
+  */
+int Pressure::getPeriod()
+{
+    return (int)samplePeriod;
+}
+
+/**
+  * Attempts to set the sample range of the pressure to the specified value.
+  *
+  * @param range The requested sample range of samples.
+  *
+  * @return DEVICE_OK on success, DEVICE_I2C_ERROR is the request fails.
+  *
+  * @code
+  * // the sample range of the pressure is now.
+  * pressure.setRange(8);
+  * @endcode
+  *
+  * @note The requested range may not be possible on the hardware. In this case, the
+  * nearest lower range is chosen.
+  */
+int Pressure::setRange(int range)
+{
+    int result;
+
+    sampleRange = range;
+    result = configure();
+
+    sampleRange = getRange();
+    return result;
+}
+
+/**
+  * Reads the currently configured sample range of the pressure.
+  *
+  * @return The sample range.
+  */
+int Pressure::getRange()
+{
+    return (int)sampleRange;
+}
+
+/**
+ * Configures the pressure and sample rate defined
+ * in this object. The nearest values are chosen to those defined
+ * that are supported by the hardware. The instance variables are then
+ * updated to reflect reality.
+ *
+ * @return DEVICE_OK on success, DEVICE_I2C_ERROR if the pressure could not be configured.
+ *
+ * @note This method should be overidden by the hardware driver to implement the requested
+ * changes in hardware.
+ */
+int Pressure::configure()
+{
+    return DEVICE_NOT_SUPPORTED;
+}
+
+/**
+ * Poll to see if new data is available from the hardware. If so, update it.
+ * n.b. it is not necessary to explicitly call this function to update data
+ * (it normally happens in the background when the scheduler is idle), but a check is performed
+ * if the user explicitly requests up to date data.
+ *
+ * @return DEVICE_OK on success, DEVICE_I2C_ERROR if the update fails.
+ *
+ * @note This method should be overidden by the hardware driver to implement the requested
+ * changes in hardware.
+ */
+int Pressure::requestUpdate()
+{
+    return DEVICE_NOT_SUPPORTED;
+}
+
+/**
+ * Reads the last pressure value stored.
+ * @return The pressure measured.
+ */
+uint16_t Pressure::getSample()
+{
+    requestUpdate();
+    return sample;
+}
+
+/**
+  * Destructor, where we deregister from the array of fiber components.
+  */
+Pressure::~Pressure()
+{
+}
+