-
Notifications
You must be signed in to change notification settings - Fork 6
Main Menu Commands
This is a list of commands accessible from the main menu prompt:
AmiExpress has many functions that are part of the program code that assist users in what they want out of the system. These commands are mostly single letter commands that the user types and hits return for the execution. AmiExpress does not work with a HOT-KEY type of user input. This means that the user will be saved from having to look at a screen load of data when they accidentally hit a wrong key. A carriage return always indicates an intended execution.
This section is divided into two parts, The SYSOP ONLY COMMANDS, and the Standard User Commands.
These commands are the only commands that are called up by single digit number codes. They are available only to users with SYSOP SECURITY LEVELS as defined in the Config file by AmiConfig under ACCOUNT EDITING.
This is used to either review existing accounts and modify them, or scan for any new user LOGONS that wish to be validated. The account editing module is very easy to use in that it is basically menu driven. You can also get into the BBSInfo CONF. from here. Before Express will start the normal Account Editing it will try to open a MODULE called "ACCOUNTS" which should be located in the SYSCMD Directory. This is for further coming releases of different Account Editors.
The Account Editing screen will look like this:
ACTIVE [1] BAUD: 14400
A> Name: ByteMaster B> Location ......: Location
C> Pass ..........: ENCRYPTED
D> Phone Number ..: 318-793-4101 F> Area Name......: Standard
E> Ratio .........: 0 H> Sec_Level .....: 255
G> Ratio Type ....: 0 <-Byte) J> AutoReJoin ....: 1
I> Uploads .......: 0 L> Messages_Posted: 0
K> Downloads .....: 0 N> New_User ......: No #Calls: 1
M> Bytes Uled ....: 1 Last Called ...: Tue May 26 22:00:17 1994
O> Bytes Dled ....: 0 Computer Type .: Amiga 1000
Q> Byte Limit ....: 0 Screen Type ...: Amiga Ansi
P> Time_Total: [0 ] mins Y> Cps Up: 0 Z> Cps DN: 0
R> Time_Limit: [0 ] mins S> Time_Used: [0 ] mins T> UUCP: 0
U> Chat_Limit: [0 ] mins V> Chat_Used: [0 ] mins
X=EXIT-NOSAVE ~=SAVE 1-8=Presets 9=RE-ACTIVATE DEL=DELETE
TAB=CONT @=CONFERENCE ACCOUNTING !=CREDIT ACCOUNT MAINTENANCE
Press the following keys to change the data of the User:
A> Lets you change the name of the User you are looking at
B> Lets you change the location where the user is living
C> Lets you change the password of the user you are looking at
D> Lets you change the phonenumber of the current user
E> Lets you change the Ratio of the user you are looking at
F> Here you can change the Conf.Access of the User
G> Lets you change the Ratio Type of the User. From here you have 3 different Ratio Types:
- Ratio Type 0 = Bytes only
- Ratio Type 1 = Bytes & Files
- Ratio Type 2 = Files only
The ratio type determines the way the Ratio will be calculated.
H> Lets you change the Security Level of the user you are looking at
I> Lets you change the number of Upload the user has done.
J> Lets you change the Conference at which the User logged in the last time he called the system.
K> Lets you change the number of downloads the user has done.
L> Lets you change the number of Messages the user posted in the BBS.
M> Lets you change the number of Bytes the user uploaded.
N> Lets you change if the user is a NEW USER or not. this is a flag function. if it is in the "YES" mode the user will be found if you search for new users. After you edit the USERDATA with a present the flag will be changed automatically to "NO".
O> Lets you change the number of Bytes the user downloaded.
P> Lets you change the Time Total for the day.
Q> Lets you change the number Bytes which the can download at a day.
R> Lets you change the Time Limit for a day.
S> Lets you change the Time the user has already used today.
T> Lets you change if the User is a User of UUCP or not.
U> Lets you change the chat limit time a user has.
V> Lets you change the chat limit used for the day.
Y> Lets you change the Top Upload CPS the User ever had.
Z> Lets you change the Top Download CPS the User ever had.
#> Lets you change the Number of Calls a user has done to your System.
Now follows the normal commands in the Account Editing:
[ X ] - Exit the Account editing without saving the current changes
[ TAB ] - Lets you go to the next user who matches to the USERNAME you entered before.
[ ~ ] - Will save the current changes of the USERDATA.
[ 1-8 ] - Will set the USERDATA to a Present of ACP.STARTUP
[ 9 ] - This command will re-activate a deleted user.
[ DEL ] - This command will delete the user you are looking at. you can re-activate a user by typing "9" at the AccountEditing
[ + ] - Will go on the next user in the USERDATA.
[ - ] - Will go on the previews user in the USERDATA.
[ ! ] - This will activate the ACCOUNT CREDIT MAINTENANCE. This feature allows you to keep track of paying users, The assumption is that if a user pays, then they are paying for a DISABLED ratio. CREDIT MAINTENANCE will let you establish the number of days that the credit account is to be in effect. During this time period the user will be given an 'EFFECTIVE' DISABLED ratio. Their ratio does not actually change, but express will treat there account as a disabled ratio. So during the credit period an 'FS' command or 'S' command will reflect a DISABLED ratio. Once the credit account has expired, express will then use the ratio established for the user.
[ @ ] - Will bring you into the Conference Accounting. You MUST! have conference accounting on for this to work. Once in this area, you will be shown each conference, screen by screen, there you can edit the user's STATS for each conference. You go from conference to conference by using the +/- keys. Follow the screens to save and exit.
This lets the sysop view the BBS:NODE{x}/CALLERSLOG file backwards. The last line written to the CALLERSLOG will be displayed first and the first line of the CALLERSLOG will be displayed last. On system running more than one node, this command will ask which NODE's CALLERSLOG to view.
If you started this Command, the BBS will check if the one who started the command is a remote or a local one. If the one who started it is a local one it will search for a Door called "EDITOR" in the SYSCMD and if it exists it will be executed and the normal starting of the EMACS will be skipped.
If the one who started the command is in REMOTE_LOGON then the command will be executed as follows: This command uses the command line version of MicroEmacs for on-line directory editing. For more information on how to use EMACS, you should refer to the section on COMMON EMACS COMMANDS. This command asks the user which directory to edit before it opens up the appropriate AUX: or CNN: channel and executing EMACS.
NOTE: AUX{x}: is used only on remote connections and if activea watchdog task that checks for carrier loss is also invoked.
If carrier is lost while editing directories, the computer will be reset within two seconds.
A special note to MULTI NODE systems: The watchdog resets the computer if a carrier is lost regardless of what the other nodes are doing. If users are logged in on other nodes, they will be disconnected when the computer resets. A later version of AmiExpress will send a notification to the other nodes and a time-out requestor locally will inform the sysop and users that express wants to reset the computer and that everyone should finish up what they're doing.
Exiting from EMACS with CTRL-X CTRL-C key combination will return the user to the MAIN MENU PROMPT. While a user is in EMACS, the BBS will notify the sysop by placing a line like:
User in EMACS........
WARNING! for those of you using the A2232 multi serial card you may run into problems using the editor. We are currently working on a FullScreen editor to take it's place.
This command is basically the same as the previous with the option to specify full path and file name to edit. This commands prompts the user for the necessary information.
This command works just like the AmigaDos List command and displays the directory and sub-directories available for the specified path. The command can also display any comments (FILENOTES), attached to the files themselves. When selected, AmiExpress will ask for the full path name and whether to include comments or not.
This Command has been removed currently in this version of express. There are some great doors with the same capabilities to replace this command. If you choose one of the great doors that are out, I Personally recommend the MALTESE FALCON's version. If you use FALCON's Shell door, remember that the spy command does not work with this version of Express, it was only able to handle 9 nodes. Express can now handle 32 nodes, so disable this command in the cfg, otherwise Install it as a normal door in your BBSCmd directory and choose the 0 button for that.
This Command is exactly the same as the normal User Download command , but has the added ability with which the sysop can download files from any path on the HardDisk. The WILDCARD searching is removed in this command to prevent error in searching for files. All files on the HardDisk can be downloaded with this command unless the files are RESTRICTED for downloading with the File Comment "RESTRICTED", this will prevent downloading of files you want never to be downloaded by your co-sysop, or anyone else with DS enabled.
This Command is exactly the same as the normal User Text View command, and has the added ability, that the sysop can View any file from any path on the HardDisk. All files can be viewed with this command, unless the RESTRICTED file comment "RESTRICTED" is used. This will prevent users from viewing private files of yours.
These commands are explained in detail. All the commands here can be chosen in the ACCESS ICONS for EXPRESS.
[ < ] - Joining Conference Up & Down: [ > ]
These two commands allows the user to join conferences by only using
the '<' '>' keys. This will let the user go up one conference and
down one conference. Example: User is in CONF. 3 and use the '>' key.
so he will automatically join the one higher conference he has access
to, and if he will use the '<' key again he will join CONF. 3 again.
[ A ] - Alter File Flags:
This command allows the user to change the flagged file list
without having to do a file listings and get a PAUSE...MORE
prompt to change the flags.
Chaining data is allowed, or the routine will prompt the user
for the information.
First it will show the current list of flags.
No file flags
Filename(s) to flag: (C)lear, (Enter)=none?
At this prompt the user can:
1. Enter new files to add to the flag list
2. Enter 'C' to goto the clear flag prompt
Filename(s) to Clear: (*)All, (Enter)=none?
At this prompt the user can:
1. Enter filenames to remove from the flag list,
WILDCARDS are valid, however they will only
remove the first entry.
2. Use '*' to remove all entries in the list.
3. Hit Return to exit.
Once a user exits the Clear prompt, it will once
again show the list of flagged files and drop back
to the MAIN MENU PROMPT.
[ B ] - Bulletins:
This command allows the user to view bulletins that the sysop
has made available.
- First, the BBS checks to see if the file
BBS:<CONF>/BULLETINS/BULLHELP.TXT is available; if not, it tells
the user that no bulletins are available in that conference.
- If the BBS:<CONF>/BULLETINS/BULLHELP.TXT is found, it is displayed
and the user is prompted to enter the bulletin # to view or '?' to
Redisplay the BULLHELP.TXT which is the bulletins menu.
- If a user selects a valid bulletin #, it is displayed and the BBS
returns back to the bulletin prompt.
- If a user selects an invalid bulletin #, the BBS informs the user
that there is no bulletin #{x} where {x} = the specified bulletin.
[ C ] - Comment to Sysop:
This command is exactly the same as the regular ENTER MESSAGE command
except that the message is addressed privately to the System-Operator.
The TO: field is automatically filled with the User name on SLOT 1,
which is the Sysop.
If the BBS located the tooltype "FORWARDMAIL= <str>" in the Conference
ICON is turned on, the Mail will be forwarded to the User named in
the <str>. This is very useful if you go to holiday and want your
co-sysop to read the messages to you without typing "R" for read
messages.
[ D ] - Download File(s):
This command accesses the file transfer procedure for sending files
from the system to the remote user. The flow-chart for this command
is quite complex and is outlined below:
1. If the ToolType NDIRS contains zero, the BBS informs the user
that there are no files to download from that conference.
2. The BBS displays the File BBS:CONF/DOWNLOADMSG.TXT
3. The BBS displays the users Download/Upload STATS.
4. The BBS calculates the ratio limits the user has before uploading
files to the system.
5. Next, it displays the transfer protocol the user take for default.
The User can change this protocols by using the "W" command.
6. If the user had specified 'DS' instead of just 'D' the download
is considered a sysop download and if the user is allowed to
use SYSOPDOWNLOAD, then the download can be made from any valid
AmigaDos path on the system. If this is the case, the BBS asks
for the full path and filename. NO WILDCARDS ARE ALLOWED with a
Sysop Download.
7. The BBS asks the user to enter the filename(s).
8. Checks for special characters in the filename like ":/" etc.
If found, tells the users that special symbols may not be included
when downloading.
9. Full WILDCARDS are allowed when doing a regular download, but just
the * WILDCARD character alone is not allowed.
-
Now, the BBS scans the specified paths from the CONF ICON and when it finds the file that the user requested, it displays the file length in Kbytes, time required to download it at current baud rate, and checks if the user has enough credits to download the file. If so, AmiExpress checks the filename against what is in existing File Flag list and if it isn't already there, it adds it. So, if the download sequence is aborted for any reason, just hitting "D" again will download the flagged file. To remove from flaglist, the user would use the 'A' command.
-
Now the BBS checks if there is an Comment at the File like "RESTRICTED" or "FREE DOWNLOAD" ... if there is a Comment like this then the BBS will display some messages when the File has a comment like "RESTRICTED" it is not not allowed to download this file and the BBS will write a comment into the BBS:NODE{x}/CALLERSLOG that a user tried to download this File... and with this comment you can`t download this file with a level of 255 and sysop download also.. so the file is 100% safe for downloading... if there is the comment "FREE DOWNLOAD" the BBS will make this file free download and it will costs no credits to download it...
-
After hitting return alone on a filespec prompt, the BBS re-checks the totals to see if the batch is within the user's limits.
-
If so, AmiExpress asks either to start, abort, or automatically logoff at the end of the transfer. The 'G'oodbye after transfer gives the user 10 seconds to change his mind after the transfer before performing an automatic disconnect sequence.
-
At this point the download sequence is about to begin and so the necessary information is written to the BBS:NODE{x}/UDLOG, if turned on.
-
At the end of the download, if the users' security level is below the one you choose for the tooltype KEEP_UPLOAD_CREDIT=, then the user's number of downloads and number of bytes downloaded get updated with the new download STATS.
-
At this point, the download sequence is completed, and the BBS tells the user his new STATS before returning back to the MAIN MENU PROMPT.
[ E ] - Enter a Message:
This command allows the user to leave private or public mail to other
users on the system. There are several options with this command and
they are outlined below.
1. Asks for who to send it to. If a WILDCARD is used the search
will find the first user that fits the WILDCARD and will display
it and then ask if its correct, if the user says no then it
will search forward. If it doesn't find the user it will
exit back to the MainMenu prompt.
2. If the user just hits return on the TO: prompt it will send
the message to ALL.
3. A feature added in is to be able to leave a message to
"EALL" this means to EMAIL ALL people, this is only usable
by users you give access to writing EALL Messages by changing
the tooltype in the ACCESS ICON for the User. What this does is to
leave ONE message to ALL USERS , when a person calls
the system it searches for mail in that conference to that
user it will say they have mail, from the user that left the
"EALL" message. The TO: will show the user who is receiving
the message with "(ALL)" after their name. The message can
only be deleted by the sender or a user with SYSOP access
4. Another name that is valid in the TO: prompt is SYSOP, this
will be replaced by the Name of the SYSOP, in user slot 1
5. Next prompt is the Subject of the message, if the user just
hits return it will exit out of the enter message
6. The BBS will now ask if the message is to be readable only
by the receiver of the message or it will be public.
7. If you have the optional Full-Screen editor installed, the BBS will
now ask you whether you want to use the Full-Screen editor. The user
has the option what editor he/she wants with the 'W' command if the
sysop has chosen to have it so.
8. Now the user has entered the message editor. The following commands
assume you have entered the internal Line-Editor.
9. Tabs now work in the editor, they are indicated by a '|' in
the header.
-
CTRL-X in the message editor will delete the current line.
-
If you hit a return on a blank line you will exit the edit to the edit command prompt.
-
The options are:
-
bort - Abort entering the message
-
ont - Continue entering the message, this option will print the last line with text and put the cursor at the end of the line.
-
elete - Allows a user to delete a specific line.
-
dit - Allows the user to change text within a line.
-
ile - Allows a user with tooltype SYSOP_DOWNLOAD to attach a file to download to the message. This option will ask for the filename to attach to the message and if you wanted the file deleted with the message as its deleted.
-
ci List- If you have a MCI Header in your Message, you are able to use this function. This function will display you the whole text with all MCI comment in it.
-
ist - List the message to the screen.
-
ave - Saves the message. -
fer - Allows a User to upload a file into the MSGBASE and make this file automatically ATTACHED at a Message. To allow the user to do this he must have the tooltype "ACS.PRI_MSGFILES" in his ACCESS ICON. If the Message the User writes is an ALL or EALL message the user must have "ACS.PUB_MSGFILES" turned on to do this.
-
[ F ] - File Listings:
This command allows a user to get Full directory listings of the
catalogs maintained by the BBS. As mentioned before, this is
specified in the Tooltype NDIRS=<numb> in the CONF ICON.
1. If the number of directories in the conference is zero
or NDIRS is zero, then the BBS will display
"No files available in this conference." And drop the user
back to the main prompt.
2. Displays the file BBS:CONF/FILEHELP.TXT only if
all the options were not specified on the command line.
3. It will then ask for the directory to list including the
'H'old directory. The hold directory can only be used
by a user with access greater than 200.
4. The specified directory will be displayed and will pause
if the NS hasn't already been specified, at the users
lines per screen point.
5. On the pause prompt, you can select 'F' for flagging files.
[ FS ] - Full Status View:
This option is used to allow the user to have a full view over his
access status in each conference. It will display Bytes Down/Uploaded
in each conference the user has access to and will display the RATIO
too.
[ G ] - Goodbye (LOGOFF):
This option is used to end the current session with the host
system by the remote user. When the user hits 'G', the BBS
performs several clean-up functions.
1. First checks to see if there was a ZoomMail that hasn't
been downloaded, if there was it would ask if the user
wanted to leave anyway.
2. The system then checks to see if there were any partial
uploads that the user hasn't finished sending yet. If
so then it would let the user know and ask if he wanted
to leave anyway. If the user didn't want to leave, then
the BBS would ask if the user wanted to view the files.
If the user did want to view them, then the BBS would go
into the resume routine showing the user the filename
and filesize, then ask if he wanted to resume on that
particular file. If not then the BBS would ask if the user
wanted to delete the file. If the user didn't want to
delete the file then the BBS would go to the next file
that was to be resumed.
3. If the user hadn't specified the 'Q' at the ANSI color
prompt, or the SUPPRESS_QLOGON is given the BBS would
display the file: BBS:NODE{x}/LOGOFF.TXT.
4. Now the BBS will try to open a Module called "LOGOFF" or
"LOGOFF<node>". If the BBS will find such a module, it will
be started.
[ H ] - Help:
This command displays the on-line help text file for the user to
refer to.
At this command, the BBS looks for and displays the file :
BBS:BBSHELP.TXT and if not found will say that No help is
currently available.
[ J ] - Join Conference:
This command is used to switch from the current conference to
another conference that the user has access privilege to.
The BBS looks for the file BBS:NODE{x}/JOINCONF{SEC}.TXT and
tries to display it. If not found, it will print a message
informing the user that the file is missing.
Then, prompts the user to enter the number of the conference they
wish to join. If the user does not have access to the requested
conference, then the BBS will tell the user that they don't have
access to that conference.
If the user has access to the requested conference, AmiExpress
switches to that conference and checks for mail for the user, and
then display any appropriate bulletin files if they exist.
If the Option "RELATIVE_CONFERENCES" is turned on in the CONF.DEF
ICON the BBS will only display the Conferences which the User has
access to.
[ M ] - Mode Select:
This command switches between ANSI color output or Plain Monochrome
output on the users end. When ANSI is on, the BBS tries to display
files that have the extension by default. The normal plain
(.TXT) files are reverted to if extension files are not
found.
[ RZ ] - Zmodem Upload Command:
This command executes an immediate Zmodem upload.
[ ^ ] - Extended Help Command:
This command allows a user to read the help files that yu have put in the
BBS:help directory. The help commands may include MCI commands,
like displaying UserNames to personalize the help commands or some other
data over MCI.
[ N ] - New Files Since Date:
This command allows the user to list files from a specified date onwards
or from the last time they called the system. In other words, with
this command, users can see what the system has to offer in terms of
files since their last call.
1. If the number of directories in the conference is zero
then the BBS will display "No files available in this
conference." And drop the user back to the main prompt.
2. It will then ask for the date they want to list from.
The last date they were on will be the default, this is
selected by just hitting return alone. Entering the date
to list from must be done as MM-DD-YY.
3. Next, the BBS asks for the directory to search thru. An 'A'
can be used to list all directories, also 'U' can be
specified for the upload directory. And H for the hold
directory. The hold directory can only be used by a user
with access greater than 200.
4. The Pause prompt works the same as described in the file
listing section.
[ O ] - Operator Page:
This command is used by the remote user to call the system operator
for on-line chat.
1. First of all Express will check the SysopPageCounter to see if
the user already paged the sysop. If the user paged the sysop
more then the given maximum number, express will automatically go to
comment writing instead of paging the sysop.
2. If the User is calling up the system operator for the first time
on the current session, the users name field will be changed to a red
color when 3 bitplanes are active, and will have star preceding
his name if the BBS was booted in 1 bitplane. Also, if the
ICONFIED window is active, the name filed there will also be
highlighted a different color. In this way, a sysop can see if
the user on-line has requested to chat.
3. If the F7 Chat toggle flag is not set to allow paging
then the BBS says:
"Sorry, The SYSOP, is not around right now
You can use 'C' to leave a comment."
4. If the chat toggle flag is set to allow paging, then the
BBS adds to BBS:NODE{x}/CALLERSLOG that the user paged,
Then displays "Paging SYSOP (CTRL-C to Abort). ." followed
by bells and more dots.
5. If you, the SYSOP, wanted to chat with the user you would
Hit F1 to enter chat, then AmiExpress looks for the file
BBS:NODE{x}/STARTCHAT.TXT, and if found displays
it to the user. This can be a simple greeting to the user.
If this file is not found, then the standard sysop chat
active message is sent to the screen. The same F1 will exit
chat when you are finished and the BBS will display the File
BBS:NODE{x}/ENDCHAT.TXT. During chat, if ANSI mode is
selected, your text will be a different color than the user ones.
[ Q ] - Quiet Node:
This command will change the Quiet Node option you choose for a node.
With this command a user can prevent other users from seeing them on
[ R ] - Read Mail:
This command is used to access the on-line mailing system to read
mail either to the user or for all users. It is also used when a
certain message will be replied to.
1. First the BBS shows the read prompt
MSG. Options: A,D,F,R,Q,?,<CR> ( QUIT )>:
(1). <A>gain, displays the message currently on again.
(specified by the 'a' in the above line)
(2). <D>elete, allows the user to delete a message only
if he left the message or the message is to him.
Also a user with access of 210+ can delete any
mail.
(3). <F>ile, will test if there is any Attached File to
download.
(4). <R>eply, allows the user to reply to the current message.
The BBS will place the user on the SUBJECT: field
with the previous subject and place the cursor on
the end of the line. If the user wants to change
the subject he can delete over the existing subject
and enter a new one, or hitting return will keep the
old subject.
After this, the BBS will ask if the reply should
be private, and by default this is set to No.
Next, the BBS will ask whether to quote the current
message in the reply, again the default is No.
If the user selected Yes to quote the message, the
entire message will be re-displayed and the BBS will
prompt the user with the following:
Enter Startline,Endline or (*=ALL, A=Abort):
Where the user would have to type either a '*' to
quote the whole message specify start and end
lines separated by a comma.
Then the user would be put in the on-line message
editor to enter his message. Commands for the editor
work in much the same way as the Enter Message
command. For more information, please re-read the
ENTER MESSAGE Command.
(5). <?>, this will display the full description of the packed
Mail Reading line and will help you.
(6). <CR=Next>, let you continue search for new messages.
(7). "EH" - This allows the sysop to edit a message
Header. You can change who the MSG is to,
from, the subject and whether it is to be
a private message or not.
(8). "U" - This will let the sysop go automatically to account
editing for the account the message is from. With this way
you can fast validate a NEWUSER by reading the message and
go to account editing.
[ RL ] - RELOGON:
This command will make a RELOGON at the Node you start it. This will
drop the user back to the Normal LOGON and will start a Module called
"RELOGON" or "RELOGON<node>" in SYSCMD Directory. If this Module
is available it will be started and if it is finished the user will
be dropped back to the LogonString.
[ S ] - Status of On-Line User:
This command simply reports the users' current information pertaining
to his account. This is in the form of:
Caller Num.: 2049
Lst Date On: 05-14-93
Security Lv: 30
# Times On : 579
Ratio DL/UL: Disabled
Online Baud: 16800
Rate CPS UP: 0
Rate CPS DN: 0
Screen Clr: NO
Protocol : /X Zmodem
Sysop Pages Remaining: 3
Uploads Downloads
Conf Files Bytes Files Bytes Bytes Avail Ratio
---- ------- --------- ------- --------- ----------- -----
2> 0 0 0 0 0 DSBLD
[ T ] - Time, at the system site:
This command reports back to the user what the internal battery backed
up clock at the BBS site is set at. Local time/date stamp function.
[ U ] - Upload File(s):
This command puts the BBS in the file receive mode, where the remote
user can send files to the system.
1. The BBS first checks to see if there are file directories to be
uploaded to, by looking at NDIRS=<numb> tooltype. If this type is
unavailable or reports zero, the user is returned back to the
MAIN MENU PROMPT after a message stating "No files available in this
conference."
2. If a file called BBS:CONF/UPLOADMSG.TXT exists
the BBS displays that to the user.
3. The BBS now calculates free disk space, the first number
displayed, is the amount of free space on all the drives
listed in DRIVES.DEF.INFO in BBS: directory.
Only drives that contain download files for the BBS
should be included, this way the user knows how much
free space is left on the total system.
The second number displayed is the amount of free space
only in the BBS:CONF/UPLOAD directory. This is so the
BBS and the user know exactly how much space is available
to receive uploads until the sysop does some maintenance.
Currently the BBS is content to allow uploads until the
free space in BBS:CONF/UPLOAD is less than 2,000,000 bytes.
4. At this point the BBS calls the resume routine to check
if there are any files to resume on, this works the same way
as explained under the 'G'oodbye command.
5. The BBS will then ask the user to enter the filenames of the
files he will be uploading, or he can press return alone to
have Zmodem tell the BBS the names. Specifying an 'A' will
abort out of an upload altogether and drop the user back to the
main prompt.
6. If the user enters the filenames, the BBS will check to make
sure they don't already exist in the conference, if not the
BBS will ask him to enter the description for each file.
Entering a blank line will end the description.
7. Next the BBS will display:
(Enter) to Start, (G)oodbye after transfer, (A)bort?
this works the same as specified in the download routines.
At this point the Sysop is able to press "L" for start a
local upload routine, which will pop up a Requester for
selecting files to upload LOCAL into the BBS without starting
the ZMODEM Transfer over the Serial In/Output.
8. At this point if the user has not been added to the end of
BBS:NODE{x}/UDLOG he will be.
9. If the Upload is now to be started the BBS will check in the file
you specified for the FILESNOTALLOWED=<pathname> option in the NODE
ICON. If this file is not allowed to be uploaded it will skip
the upload.
-
The BBS then displays the STATS from the transfer for all the files.
-
The users time is then credited for the uploads.
-
Next the BBS goes thru the files sent and checks to see if the name is longer than 12 characters, if so the BBS asks the user to rename the file.
-
The BBS then checks to see if the user has already given the descriptions for the file, if so it posts it accordingly.
-
If the user has not already given the description for the file the BBS asks for the description of the file. Again giving 8 lines for the description.
-
If the user gets disconnected while entering the description the BBS will put "LOSS CARRIER" for the description. and place the file in the BBS:CONF/LCFILES directory, along with a Comment in the .lc which will contain a list of all the files he will need to enter descriptions for when he calls back. The Re-Enter description process is done at LOGON with the PartUploads routine.
-
Once the description has been entered, the BBS checks if there is a door called "FILECHECK" in the SYSCMD directory, if so it will be executed and this internal "FCHECK" will be used. This is where you can use a multiple type of file checker for all formats. If the door doesn`t exists express will check if there is a file extension. (a file extension is usually on 3 characters preceded by a '.'. (IE:.DMS,.LHA.)).
Express now compares the extension with any ICON of the same extension name in the BBS:FCHECK directory.
ICONS in the FCHECK directory specify that you are using external file checkers. The format for each ICON has been mentioned below.
If no external checker exists for the file then it will be posted with a comment "N" for non checked.
-
If the archive is checked and it passes the BBS puts a 'P' between the filename and filesize in the listing.
-
If the archive is checked and if found bad then the BBS puts a 'F' between the filename and filesize in the listing.
-
If the file is not one of the above checkable file types then the BBS puts a 'N' between the filename and the filesize in the listing.
-
Now the BBS will post the file in the listings area. If the user specified a '/' at the beginning of the description for the file, or the file failed archive check, or the user got disconnected then the BBS posts the file to the end of BBS:CONF/HOLD/HELD If the archive passed or wasn't checkable and the user didn't specify a '/' at the beginning of the description then the BBS will post the file to the end of BBS:CONF/DIR{U} where U is the upload directory (or the highest directory available).
-
If when the BBS goes to move the file, like to the hold directory and there is already a file in the hold with the same name, the BBS will add a '_' to the end of the filename until it can be renamed.
-
Once all the file are exhausted the BBS checks to make sure there aren't any free floating files in the BBS:NODEx/PLAYPEN directory, if there are the BBS then moves the files to BBS:CONF/PARTUPLOAD as partially uploaded files from the current user ONLINE.
[ V ] - View a Text File:
This command allows the user to view the contents of a TEXT file
located in the BBS:CONFNAME/UPLOAD directory. For Co-Sysop's with
Access to SYSOP_VIEW in Access ICONS, TEXT files can be viewed
from any valid system path.
1. The BBS first checks to see if there are file Dirs in that CONF.
by looking in the tooltype NDIRS=<numb>. If this type is unavailable or
reports zero, the user is returned back to the MAIN MENU PROMPT
after a message stating "No files available in this conference."
2. The BBS then asks the user for the filename to view.
3. If the user has ACCESS to the SYSOP_VIEW Option and he specified
'VS' instead of just 'V' then the BBS will allow the filename to
include the path. The sysop view is noted at the end
of BBS:NODE{x}/CALLERSLOG what file was viewed.
4. The BBS then displays the file as long as the characters
in the file are < 128 in value. If a character is
greater than 127 then the BBS says "This file is not a
text file." And drops back to the main prompt.
NOTE: If a file has a comment of RESTRICTED then the user
~~~~ will not be able to view the file. If an attempt was
made then the users name will be annotated in the
BBS:NODE{x}/CallersLog
[ W ] - Write User Parameters:
This command allows the user to change some personal items pertaining
to his account on the system.
When called, this command brings up the following:
1. LOGIN NAME..............ByteMaster
2. REAL NAME...............Joseph Hodge
3. INTERNET NAME...........jhodge
4. LOCATION................Radford, Va.
5. PHONE NUMBER............603-555-1212
6. PASSWORD................ENCRYPTED
7. LINES PER SCREEN........23
8. COMPUTER................Amiga 2000/GVP030
9. SCREEN TYPE.............Amiga Ansi
10. SCREEN CLEAR............Yes
11. TRANSFER PROTOCOL......./X Zmodem
12. EDITOR TYPE.............Prompt
13. ZOOM TYPE...............QWK
14. AVAILABLE FOR CHAT/OLM..Yes
Which to change <CR>= QUIT ?
At this prompt, the user can select which item to change, or hit
return alone to exit from this routine.
The first four items can be security set by the Config program so
that users without the necessary security cannot change their
Name, Location, Phone or Password. For more information, refer to the
documentation for the AmiConfig program.
[ WHO ] - Node Information:
This command shows the user which users are ONLINE on the other nodes
and what they are doing actually. If you choose QUIETNODE for a
specified node, this node will be skipped in displaying this
information.
[ X ] - Expert Mode Toggle:
This command allows the user to switch between eXpert and Novice mode
where expert mode will not display the menu unless a '?' is specified
at the command line and Novice will Redisplay the menu after every
command issued and completed.
[ Z ] - Zippy Text Search:
This command allows the user to scan thru all the BBS:CONFNAME/DIR{x}
files for a match for a specified string.
When it finds a match, it displays the whole filespec including the
description.
If the NDIRS=<numb> tooltype reports zero or does not exist, then
zippy search will not be functional.
[ ZOOM ] - Zoo Mail:
Zoo mail has been reinstalled into Ami-Express and now relies
on current compression schemes provided by modem manufacturers
instead of Zoo, as zoo has a tendency to crash the Amiga
in certain instances. ZOOM will compile all the user's unread
mail, (in LHA format if requested) from ALL accessible conferences
into a freely downloadable file that will be automatically added
to the flaglist for downloading.
[ CF ] - Set Conference Configuration:
This command will allow your users to set the way express handles
conferences. From here they can set the 'NEW FILE SCAN',
'NEW MESSAGE SCAN', and turn 'OFF' and 'ON' what conferences they
want to ZOOM mail from.
In the Conference Maintenance option in the Account editor you can
also Globally set these options (F5).
[ VO ] - Voting Booth:
This Command requires ACS.MODIFY_VOTE for SYSOPS and ACS.VOTE
for the users in the access icon.
NOTE: with the VOTING BOOTH a directory called VOTE will automatically
be created in the conference directory when you initialize a voting
booth for a conference.
The voting booth can have up to 25 topics per conference, each
topic can have up to 99 multiple choice questions to it.
Also there is a new option to the Conference Maintenance screen called
RESET VOTING BOOTH, when this is run it will zero out the bits in the
CONF.DB that keeps track of which voting topics a user has already
voted on. You should do this for each conference that you plan on
having a voting booth in.
The Voting booth is conference based, meaning that one conference
cannot share the voting booth of another conference.
To setup a Voting Booth for a conference simply reset the voted
flags in the CONF.DB via conference maintenance then:
1. type 'VO' from the menu prompt.
2. Select the 'CREATE VOTE TOPIC' menu option.
(REMEMBER you must have ACS.MODIFY_VOTE access for this to work)
3. You will be prompted to enter a TOPIC NUMBER this number can
range from 1 - 25, you will probably want to start with '1'.
4. You will now be prompted for a ONE LINE DESCRIPTION of the
TOPIC. Then you can save, edit, abort, list, delete etc.
5. Next you will be asked for the QUESTIONS OF THE TOPIC. YOU CAN
have up to 99 questions per TOPIC.
6. After you are finished entering a question then enter 'S' for
save in order for it to ask you for the multiple choice options.
You can have up to 25 multiple choice options per question.
7. When you are finished entering 1 choice, then press return and
save to submit it and go onto the next choice.
8. When you are finished entering choices the when prompted for the
next choice , simply press save, this will prompt you for the
next question.
9. If you have no more questions, then press ABORT at the QUESTION
prompt.
10. This should bring you back to the VOTE MAINTENANCE MENU.
11. At the VOTE MAINTENANCE MENU, you can also edit a vote, topic,
etc. In case you made a mistake.
NOTE:
Concerning the voting booth. After you setup a TOPIC you cannot add
questions to that topic once it is created, when a user votes on a
topic they must vote on all questions in the topic for it to be
considered a valid vote. This is handled automatically in that once
they are in the TOPIC voting process, they cannot get out of it until
they answer all the questions for that topic, if they loose carrier
while answering the questions, then the answers for that topic will
be discarded and the user will have to re-vote on the topic when they
log back on. In other words, the questions for a topic are not
updated until the user answers all questions in that topic.
Original 3.36 Documentation written by Jens Langner (/X DocWriter). Original 4.0 Documentation written by The Outlaw (Andy). Updated in 2018 to include many previously undocumented v4.0 features and also to include the new v5.x configuration options by Darren Coles
-
Ami-Express-BBS-Software
- Introduction
- Copyright Information
- Requirements
- Ami-Express Version 5
- Installation of AmiExpress
- How to install Configs
- How to configurate Startup
- Setting up the /X FTP Server
- All ToolTypes Information
- The Standard Documentation
- Programlogic of AmiExpress
- Main Menu Commands
- SysCmd Documentation
- AmiExpress HOST Addresses
- MCI imbedded Control Sequence
- Connecting to QWK and FTN message networks
- Notable Features
- Note worthy of Mention
- Offline Mail Support
- Icon Script Language Support
- Trouble Shooting
- Future planned Enhancements