- frontend: use v3 contracts
- frontend: filter out unsupported destination tokens
- beamer: check: add new command
verify-l1-invalidations - beamer: check: add new command
initiate-challenges - beamer: check: add new command
verify-challenges - relayer: add a README.md and documentation
- relayer: wait until message has arrived on the destination RequestManager
- docs: improve documentation structure
- docs: document how to run L1 invalidation and challenge checks
- agent: output exception reason from relayer
- beamer: check: add new command
initiate-l1-invalidationsto automate deployment testing - beamer: config: remove tokens and chains from state file if reset
- beamer: config: prohibit modification of
token_addressesin desired state file - contracts: use
claim.fillIdin claim resolution - contracts: allow resetting chains during
RequestManager.updateChain() - contracts: change
FillManager.invalidateFill()interface, passing values to reconstruct request id - contracts: add V3 deployment artifacts
- frontend: disable all tokens but USDC
- relayer: use keystore and password instead of private key when calling relayer
- relayer: use new contract addresses and ABIs
- frontend: switch to a different RPC for Polygon zkEVM
- frontend: increase request validity period to 24h
- agent: emit a log entry when an OP proof is successful
- agent: take the fill mutex before doing anything else when filling
- deployments: add PGN and Base artifacts
- agent: support PGN and Base chains
- beamer: config: don't add duplicate entries to whitelists
- beamer: fix handling of quantities in JSON-RPC responses
- frontend: implement subsidized transfers
- frontend: change twitter share text
- frontend: enable polygon zkevm
- frontend: minor bug fixes
- frontend: add support for Base (still not enabled)
- relayer: add support for Base
- ci: Build the image for publish
- contracts: Add FeeSub contract
- beamer:
configcommand: Ensure chain IDs from config and deployment match - relayer: Recover L1 transaction hash in Arbitrum relayer
- relayer: Improved architecture and typing
- relayer: Return proof timestamp from Optimism relayer to agent
- frontend: Detect and provide better error messages when token allowance is too low
- ci: add new e2e test to test relayer fallback for OP
- agent: adapt agent to use new deployment artifacts
- docs: update docs regarding new deployment artifacts
- beamer: introduce new beamer subcommand
writeforconfigcommand - docs: update docs regarding
configcommands - agent: add min-source-balance to agent config
- docs: update docs regarding
min-source-balanceconfig - beamer: add support for USDT & WETH
- beamer: improved beamer
config read - ci: optimized ci workflows
- agent: calculate OP finality period correctly by using prove timestamp
- frontend: add support for Polygon zkEVM (mainnet still not enabled)
- frontend: tokens/chains visibility can now be controlled easily
- frontend: fix minor bugs
- frontend: migrate to WalletConnect v2
- frontend: users can now fully disconnect from the connected wallets (session removed)
- frontend: update wallet provider SDKs
- docker: fix flaky polygon e2e test
- relayer: prevent submission of failing L1 resolutions
- relayer: Update Arbitrum SDK to 3.1.4
- relayer: Update Optimism SDK to 2.1.0
- ci: fix flaky end-to-end tests
- agent: Restructure common modules to top level directory
- agent: Add support for Optimism Bedrock relayer calls
- beamer: Introduce new beamer commands
deploy-baseanddeploy - beamer: Introduce new deployment artifacts structure
- beamer: Introduce new beamer command
configwith subcommandread - frontend/relayer: Release npm packages containing the deployment artifacts via CI
- contracts: Implement Polygon zkEVM messenger
- frontend: Support for Safe contract wallets
- frontend: Transfers get continued even if user closes app before finalizing the two transactions
- frontend: Notification when transfer was completed and share via Twitter
- frontend: Minor bug fixes
- relayer: Integrate relayer in Optimism E2E test
- relayer: Implement PolygonZKEvm relayer service
- relayer: Improve logging
- relayer: Add support for Optimism Bedrock
- relayer: Extend relayer CLI to support multiple subcommands
- relayer: Bug fixes
- scripts: Introduce generate_abi script
- agent: only continue challenge after message is finalized
- agent: call relayer through process_claims and remove InitiateL1Resolution event
- agent: halt event processor if connection error occurs on RPC
- frontend: temporarily disabled chat feedback
- frontend: minor bug fixes
- docs: update fee section
- change directory structure and add multiple sub commands to the beamer command (i.e. beamer agent ...)
- contracts: implement Ethereum messengers in order to add Ethereum as a chain
- contracts: add automatic withdrawal in ArbitrumL1Messenger
- contracts: update to Solidity 0.8.19
- contracts: implement new minLpFee calculation
- agent: support multiple chain pairs in one process
- agent: predefine allowance value per token per chain
- agent: deprecate --source-chain and --target-chain options
- agent: introduce poll period in agent config
- agent: introduce confirmation blocks in agent config to wait for confirmation of events
- agent: Use dynamic fee transactions on ETH2 chains (type 2)
- relayer: relay to and from Ethereum
- relayer: Handle redeem on Arbitrum even if message was already relayed
- health-check: introduce health check script for agents
- health-check: add monitoring for DAI
- scripts: validate deployment config with apischema
- dependencies: switch from brownie to ape
- docs: add section about beamer commands
- docs: add section containing latest mainnet addresses
- frontend: add a checkbox to approve the maximum token allowance
- frontend: add support for any injected provider
- frontend: add DAI token support
- frontend: add support for bridging from/to Ethereum mainnet
- frontend: plenty of bug fixes
- agent: properly handle HTTP 413 errors (notably used by QuickNode RPC)
- docs: added a section on updating to a new agent version
- agent: create only one relayer process per L1 resolution/invalidation
- agent: introduce a rate limiter to handle cases where the agent exceeds RPC's rate limits
- agent: when filling a request, only call ERC20 token approve if allowance is insufficient to fill the request
- frontend: added real-time claim count watcher
- frontend: automatic enable/disable of withdraw button based on claim counts
- frontend: temporarily remove boba from chain options
- frontend: handle reverted transactions
- frontend: added Arbitrum notification banner
- frontend: fixed token allowance race conditions when having multiple transfers active
- frontend: transfer submission disabled (with notification) until tokens are spent
- frontend: UI fixes/improvements
- frontend: fix unit test code coverage
- frontend: add matomo tracking consent popup
- frontend: add build version inside footer
- frontend: add social media links inside footer
- frontend: fix MetaMask wallet disconnection on network change
- frontend: integrate Coinbase wallet provider
- frontend: plenty of bug fixes
- relayer: reduced max message length used to calculate deposit amount for Arbitrum
- relayer: add support for using custom networks inside Arbitrum relayer service
- docker: fix the issue where the relayer could not be run due to missing C++ runtime lib
- docker: reduced beamer-agent container image size from 2.41GB to 254MB
- deployments: updated mainnet deployment
- contracts: major simplifications, fixes and optimizations
- contracts: audit-related fixes
- contracts: merge resolution registry into the request manager
- contracts: add support for Arbitrum
- contracts: allow withdrawals on behalf of others
- contracts: allow claims on behalf of others
- contracts: allow claims for a limited time after request expiry
- contracts: set minValidityPeriod to 30 minutes
- contracts: set maxValidityPeriod to 48 hours
- contracts: add multi-token support
- agent: add unsafe-fill-time option
- agent: raise the minimum Python version to 3.10
- docs: lots of updates to make the content current
- frontend: tons of bug fixes
- frontend: improved input form validation
- frontend: improved token amount input field - enforcing numeric input
- frontend: raised unit-test coverage to 98.5%
- frontend: clean-up & refactor large part of the codebase 🧹
- frontend: integrated Goerli testnet (Goerli Boba, Goerli Optimism, Goerli Arbitrum)
- frontend: integrate matomo tracking tool
- frontend: add wallet disconnect feature
- frontend: automated the app config generation & attached as yarn post-install hooks
- frontend: improve mobile/desktop wallet connection flows
- frontend: integrate chatbot
- frontend: add support for v1 contracts
- frontend: integrate Arbitrum One
- frontend: lots of small UI improvements
- relayer: redesign relayer architecture for multi rollup support
- relayer: implement Boba relayer
- relayer: implement Arbitrum relayer
- relayer: optimize Optimism relayer
- agent: fix handling of L1 resolution events when syncing
- contracts: max request validity period has been set to 30 minutes
- deployments: updated mainnet deployment
- frontend: input validation logic added
- frontend: updated mainnet config
- frontend: fixed token amount abbreviations
- frontend: added tooltip for displaying exact token amount balance
- frontend: added "use max" feature on click of token amount balance
- frontend: fixed error message overflow
- frontend: fixed gap issue on transfer progress line
- agent: fix incorrect log level handling
- relayer: fixed incorrect exception handling
- relayer: don't try to relay an already relayed message
- scripts: generate_account.py got a new required option, --password
- agent: fix location of relayer binaries in the container image
- agent: added support for specifying a configuration file
- agent: retry transactions in case of invalid nonces
- agent: reduce number of RPC calls by caching block data
- Initial release