snapcraft.yaml

name: cups
base: core22 # The base Snap is the execution environment for this Snap
version: '2.4.11-3'
grade: stable
summary: CUPS-based printing stack Snap
description: Complete printing environment in a Snap
confinement: strict
adopt-info: cups

# We need snapd 2.55 or later to have the needed support for the
# `cups` interface in snapd
assumes: [snapd2.55]

# Only build on the architectures supported
architectures:
  - build-on: amd64
  - build-on: arm64
  - build-on: armhf
# When expanding to RISC-V: We use "jq" (JSON interpreter) for
# auto-versioning and this is probably similar to "yq" (YAML
# interpreter) and this one needed special attention for RISC-V. See
# https://ubuntu.com//blog/we-wish-you-risc-v-holidays

# System user for filters and backends to drop privileges, "lp" is not
# available in a Snap
# See https://forum.snapcraft.io/t/system-usernames/
system-usernames:
  snap_daemon: shared

# Make fontconfig for the texttopdf and bannertopdf filters working by
# mirroring the needed directories to the places where libfontconfig is
# searching for them
layout:
  /etc/fonts:
    bind: $SNAP/etc/fonts
  /usr/share/fonts:
    bind: $SNAP/usr/share/fonts
  /var/cache/fontconfig:
    bind: $SNAP_DATA/var/cache/fontconfig
  /etc/papersize:
    bind-file: $SNAP_COMMON/etc/papersize

environment:
  CUPS_SERVERROOT: /var/snap/cups/common/etc/cups
  CUPS_DATADIR: /snap/cups/current/share/cups
  CUPS_SERVERBIN: /snap/cups/current/lib/cups

plugs:
  # This interface is needed for checking whether CUPS in this Snap
  # should run as a proxy for the system's CUPS or whether this Snap's
  # CUPS is the standard CUPS for the system.  This interface also
  # serves for scripts which do a migration of the configuration and
  # print queues of a classically installed CUPS when it is replaced
  # by this CUPS Snap
  etc-cups:
    interface: system-files
    read:
      - /etc/cups
  # Alias name for our cupsd to plug the host system's cups-control to
  # access the host system's cupsd in proxy mode while we also have a
  # slot named cups-control for snapped printer setup tools to be able
  # to manage our cupsd. The plug also allows the utilities included
  # with this Snap to do admin tasks on a CUPS daemon which is not
  # from this Snap.
  cups-host:
    interface: cups-control

slots:
  # Provide the cups-control and cups slots for other Snaps to connect to
  cups-control:
    interface: cups-control
  cups:
    interface: cups
    cups-socket-directory: $SNAP_COMMON/run

apps:
  cupsd:
    command: scripts/run-cupsd
    stop-command: scripts/stop-cupsd
    reload-command: scripts/reload-cupsd
    restart-condition: always
    daemon: simple
    plugs: [network, network-bind, avahi-control, raw-usb, etc-cups, cups-host]
  cups-browsed:
    command: scripts/run-cups-browsed
    stop-command: scripts/stop-cups-browsed
    reload-command: scripts/reload-cups-browsed
    restart-condition: always
    daemon: simple
    plugs: [network, network-bind, network-manager-observe, avahi-control]
  lpinfo:
    command: scripts/run-util sbin/lpinfo
    plugs: [network, cups-host]
  lpadmin:
    command: scripts/run-util sbin/lpadmin
    plugs: [network, avahi-control, home, cups-host]
  lpstat:
    command: scripts/run-util bin/lpstat
    plugs: [network, avahi-control, cups-host]
  lpq:
    command: scripts/run-util bin/lpq
    plugs: [network, cups-host]
  lpc:
    command: scripts/run-util sbin/lpc
    plugs: [network, cups-host]
  lpoptions:
    command: scripts/run-util bin/lpoptions
    plugs: [network, home, cups-host]
  lp:
    command: scripts/run-util bin/lp
    plugs: [network, home, cups-host]
  lpr:
    command: scripts/run-util bin/lpr
    plugs: [network, home, cups-host]
  cancel:
    command: scripts/run-util bin/cancel
    plugs: [network, cups-host]
  lprm:
    command: scripts/run-util bin/lprm
    plugs: [network, cups-host]
  cupsenable:
    command: scripts/run-util sbin/cupsenable
    plugs: [network, cups-host]
  cupsdisable:
    command: scripts/run-util sbin/cupsdisable
    plugs: [network, cups-host]
  cupsaccept:
    command: scripts/run-util sbin/cupsaccept
    plugs: [network, cups-host]
  cupsreject:
    command: scripts/run-util sbin/cupsreject
    plugs: [network, cups-host]
  accept:
    command: scripts/run-util sbin/cupsaccept
    plugs: [network, cups-host]
  reject:
    command: scripts/run-util sbin/cupsreject
    plugs: [network, cups-host]
  cupsctl:
    command: scripts/run-util sbin/cupsctl
    plugs: [network, cups-host]
  cupsfilter:
    command: scripts/run-util sbin/cupsfilter
    plugs: [network, home]
  cupstestppd:
    command: scripts/run-util bin/cupstestppd
    plugs: [network, home]
  ipptool:
    command: scripts/run-util bin/ipptool
    plugs: [network, avahi-control, home]
  ippfind:
    command: scripts/run-util bin/ippfind
    plugs: [network, avahi-control]
  driverless:
    command: scripts/run-util bin/driverless
    plugs: [network, avahi-control]
  ippeveprinter:
    command: scripts/run-util bin/ippeveprinter
    plugs: [network, network-bind, avahi-control, home, raw-usb]
  gs:
    command: bin/gs
    plugs: [home, etc-cups]

parts:
  cups:
    source: https://github.com/OpenPrinting/cups.git
    source-type: git
    source-tag: 'v2.4.11'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     lower-than: '3'
#     no-9x-revisions: true
    plugin: autotools
    autotools-configure-parameters:
      - --prefix=/
      - --exec-prefix=/
      # Prevent the libraries from being put into lib64
      - --libdir=/lib
      - --datadir=/share
      - --datarootdir=/share
      - --includedir=/include
      - --sysconfdir=/var/snap/cups/common/etc
      - --with-system-groups=root
      - --enable-libpaper
      - --disable-pam
      - --disable-systemd
      - --without-rcdir
      - --with-docdir=/share/cups/doc
      - --with-container=snap
      # We use "--with-tls=gnutls" here, as current CUPS defaults to SSL here
      # and this is buggy, causing a segfault when serving out a HTTPS web
      # interface page.
      - --with-tls=gnutls
      #- --enable-debug-printfs
    override-pull: |
      set -eux
      # Do the actual pull task
      craftctl default
      # Settings:
      # Patch to use snapctl with the slot name "cups-server" for Snap mediation
      #patch -p1 < $CRAFT_PROJECT_DIR/patches/use-snapctl-with-slot-cups-server.patch
      # Longer timeout for Avahi resolving for cupsGetDests() API function, used
      # by "lpstat -l -e" (https://github.com/OpenPrinting/cups/issues/751)
      perl -p -i -e 's/(#\s*define\s+_CUPS_DNSSD_GET_DESTS\s+)250(\s+)/\1 1000\2/' cups/dest.c
    build-packages:
      - git
      - sed
      - curl
      - perl-base
      - patch
      - autoconf
      - automake
      - libtool
      - autotools-dev
      - pkg-config
      - g++
      - libavahi-client-dev
      - libavahi-common-dev
      - libavahi-compat-libdnssd-dev
      - libdbus-1-dev
      - libgnutls28-dev
      - libkrb5-dev
      - libpam0g-dev
      - libpaper-dev
      - libsystemd-dev
      - libusb-1.0-0-dev
      - po4a
      - po-debconf
      - zlib1g-dev
      - libapparmor-dev
      - libsnapd-glib-dev
    stage-packages:
      - libusb-1.0-0
      - libavahi-common3
      - libavahi-client3
      - libpaper1
      - libsnapd-glib1
      - libapparmor1
    organize:
      var/snap/cups/common/etc: etc
    stage:
      # The *.la file which gets installed by "make install" contains a
      # wrong prefix, breaking parts of this Snap which use this library
      - -lib/lib*.la
    prime:
      - -etc/fonts
      - -var
      - -include
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/fonts
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
      # Reported unused by snapcraft linter
      - -lib/libcupsimage.*
      - -usr/lib/*/libdconf.*
      - -usr/lib/*/libicuio.*
      - -usr/lib/*/libicutest.*
      - -usr/lib/*/libicutu.*
      - -usr/lib/*/libicui18n.*

  qpdf:
    source: https://github.com/qpdf/qpdf/
    source-type: git
    source-tag: 'v11.9.1'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     lower-than: '12'
#     no-9x-revisions: true
    plugin: cmake
    cmake-parameters:
      - -DCMAKE_INSTALL_PREFIX=/
      - -DCMAKE_BUILD_RPATH_USE_ORIGIN=1
      - -DUSE_IMPLICIT_CRYPTO=0
      - -DREQUIRE_CRYPTO_GNUTLS=1
      - -DSHOW_FAILED_TEST_OUTPUT=1
      - -DCMAKE_BUILD_TYPE=RelWithDebInfo
      - -DQTEST_COLOR=0
    build-packages:
      - cmake
      - g++
      - libjpeg-dev
      - zlib1g-dev
      - libgnutls28-dev
    stage-packages:
      - libjpeg-turbo8
    stage:
      # The *.la file which gets installed by "make install" contains a
      # wrong prefix, breaking parts of this Snap which use this library
      - -usr/lib/lib*.la
    prime:
      - -etc/fonts
      - -var
      - -include
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/fonts
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
      - -usr/lib/libqpdf.a

  ghostscript:
    # use GitHub mirror of GhostPDL here, as original GIT, self-hosted by
    # Artifex is not supported by ubuntu/desktop-snaps
    #source: https://git.ghostscript.com/ghostpdl.git
    source: https://github.com/ArtifexSoftware/ghostpdl.git
    source-type: git
    source-tag: 'ghostpdl-10.05.0-test-base-001'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     format: "ghostpdl-%M.%m.%R"
#     lower-than: '11'
#     no-9x-revisions: true
    plugin: autotools
    autotools-configure-parameters:
      - --prefix=/
      - --without-x
      - --disable-gtk
      - --with-drivers=pdfwrite,pdfimage8,pdfimage24,pdfimage32,ps2write,cups,pwgraster,appleraster,urf,PCLm,PCLm8,pxlmono,pxlcolor
      - --enable-cups
      - --enable-freetype
      - --without-tesseract
      - --datarootdir=/snap/cups/current/share/
      - --with-fontpath=/snap/cups/current/share/cups/fonts
      - --with-cups-serverbin=/snap/cups/current/lib/cups
      - --with-cups-serverroot=/var/snap/cups/common/etc/cups
      - --with-cups-datadir=/snap/cups/current/share/cups
    override-pull: |
      set -eux
      # Do the actual pull task
      craftctl default
      # The repo is actually ghostpdl and not only Ghostscript, so a wider
      # variety of print data renderers/interpreters/converters. One of
      # them, gpdl, does not build with our ./configure settings but we
      # actually do not need it. So delete its source directory to skip
      # it.
      # We also delete the source directories pcl and xps to not build
      # further storage-space-consuming tools.
      rm -rf gpdl pcl xps
    build-environment:
      # To find the libraries built in this Snap
      - LD_LIBRARY_PATH: "${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$CRAFT_STAGE/usr/lib:$CRAFT_STAGE/lib"
    stage-packages:
      - libpaper1
      - libfontconfig1
      - libfreetype6
      - libpng16-16
    prime:
      - -etc/fonts
      - -var
      - -include
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/fonts
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
      - -snap/cups
    organize:
      snap/cups/current/share: share
    after: [cups]

  libcupsfilters:
    source: https://github.com/OpenPrinting/libcupsfilters
    source-type: git
    source-tag: '2.1.0'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     lower-than: '3'
#     no-9x-revisions: true
    plugin: autotools
    autotools-configure-parameters:
      - --prefix=/
      - --exec-prefix=/
      - --datadir=/share
      - --datarootdir=/share
      - --includedir=/include
      - --disable-avahi
      - --disable-mutool
    build-environment:
      # To find the libraries built in this Snap
      - LD_LIBRARY_PATH: "${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$CRAFT_STAGE/usr/lib:$CRAFT_STAGE/lib"
    build-packages:
      - gettext
      - autoconf
      - automake
      - autotools-dev
      - pkg-config
      - g++
      - sharutils
      - liblcms2-dev
      - libpoppler-cpp-dev
      - libpng-dev
      - libjpeg-dev
      - libtiff5-dev
      - zlib1g-dev
      - libfontconfig1-dev
      - libdbus-1-dev
      - libexif-dev
    stage-packages:
      - libpoppler-cpp0v5
      - libjbig0
      - liblcms2-2
      - libnspr4
      - libnss3
      - libopenjp2-7
      - libpoppler118
      - libtiff5
      - libwebp7
      - libexif12
    stage:
      - -lib/lib*.la
      # The *.la file which gets installed by "make install" contains a
      # wrong prefix, breaking parts of this Snap which use this library
    prime:
      - -etc
      - -var
      - -include
      - -lib/pkgconfig
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
      - share/cups
      - lib/lib*.so*
      - lib/*/lib*.so*
      - usr/lib/lib*.so*
      - usr/lib/*/lib*.so*
      - usr/lib/*/nss
      # Reported unused by snapcraft linter
      - -usr/lib/*/libssl3.*
    after: [cups, qpdf, ghostscript]

  libppd:
    source: https://github.com/OpenPrinting/libppd
    source-type: git
    source-tag: '2.1.0'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     lower-than: '3'
#     no-9x-revisions: true
    plugin: autotools
    # We only need libppd itself
    autotools-configure-parameters:
      - --prefix=/
      - --exec-prefix=/
      - --datadir=/share
      - --datarootdir=/share
      - --includedir=/include
      - --disable-mutool
      - --disable-pdftocairo
      - --disable-acroread
      - --with-pdftops-path=/snap/cups/current/usr/bin/pdftops
    build-environment:
      # To find the libraries built in this Snap
      - LD_LIBRARY_PATH: "${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$CRAFT_STAGE/usr/lib:$CRAFT_STAGE/lib"
      # We have to force-define the macros for the properties of the
      # external executables here, as the tests do not work in the Snap
      # build environment
      - CFLAGS: "$CFLAGS -DHAVE_GHOSTSCRIPT_PS2WRITE -DHAVE_POPPLER_PDFTOPS_WITH_ORIGPAGESIZES -DHAVE_POPPLER_PDFTOPS_WITH_RESOLUTION"
    build-packages:
      - gettext
      - autoconf
      - automake
      - autotools-dev
      - pkg-config
      - g++
      - sharutils
      - poppler-utils
    stage:
      # The *.la file which gets installed by "make install" contains a
      # wrong prefix, breaking parts of this Snap which use this library
      - -lib/lib*.la
    prime:
      - -etc
      - -var
      - -include
      - -lib/pkgconfig
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/ppdc
      - -usr/share/fonts
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
      - lib/lib*.so*
      - lib/*/lib*.so*
      - usr/lib/lib*.so*
      - usr/lib/*/lib*.so*
      - usr/lib/*/nss
    after: [cups, ghostscript, libcupsfilters]

  cups-filters:
    source: https://github.com/OpenPrinting/cups-filters.git
    source-type: git
    source-tag: '2.0.1'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     lower-than: '3'
#     no-9x-revisions: true
    plugin: autotools
    autotools-configure-parameters:
      - --prefix=/
      - --exec-prefix=/
      - --datadir=/share
      - --datarootdir=/share
      - --includedir=/include
      - --disable-mutool
      - --disable-universal-cups-filter
      - --enable-individual-cups-filters
    build-environment:
      # To find the libraries built in this Snap
      - LD_LIBRARY_PATH: "${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$CRAFT_STAGE/usr/lib:$CRAFT_STAGE/lib"
    build-packages:
      - autoconf
      - autotools-dev
      - pkg-config
      - g++
      - sharutils
      - poppler-utils
      - liblcms2-dev
      - libpoppler-cpp-dev
      - zlib1g-dev
      - libavahi-common-dev
      - libavahi-client-dev
    stage-packages:
      - poppler-utils
      - libpoppler-cpp0v5
      - libdb5.3
      - fonts-freefont-ttf
      - fonts-arphic-uming
      - fontconfig-config
    organize:
      var/snap/cups/common/etc: etc
    prime:
      - -var
      - -include
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
      # Reported unused by snapcraft linter
      - -usr/lib/*/libssl3.*
    after: [cups, qpdf, ghostscript, libcupsfilters, libppd]

  cups-browsed:
    source: https://github.com/OpenPrinting/cups-browsed.git
    source-type: git
    source-tag: '2.1.0'
    source-depth: 1
# ext:updatesnap
#   version-format:
#     lower-than: '3'
#     no-9x-revisions: true
    plugin: autotools
    autotools-configure-parameters:
      - --prefix=/
      - --exec-prefix=/
      - --datadir=/share
      - --datarootdir=/share
      - --includedir=/include
      - --without-rcdir
    build-environment:
      # To find the libraries built in this Snap
      - LD_LIBRARY_PATH: "${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$CRAFT_STAGE/usr/lib:$CRAFT_STAGE/lib"
    build-packages:
      - autoconf
      - autotools-dev
      - pkg-config
      - g++
      - sharutils
      - libglib2.0-dev
      - libldap2-dev
      - zlib1g-dev
      - libdbus-1-dev
      - libavahi-common-dev
      - libavahi-client-dev
      - libavahi-glib-dev
    stage-packages:
      - libavahi-glib1
      - libldap-2.5-0
      - libsasl2-2
      - libdb5.3
    organize:
      var/snap/cups/common/etc: etc
    prime:
      - -var
      - -include
      - -share/man
      - -share/doc
      - -share/lintian
      - -usr/share/man
      - -usr/share/doc
      - -usr/share/doc-base
      - -usr/share/lintian
    after: [cups, libcupsfilters, libppd]

  utils:
    plugin: nil
    source: .
    stage-packages:
      - perl-base
      - sed
      - grep
      - libbinutils
    organize:
      usr/bin/: bin/
      usr/lib/: lib/
      usr/share/: share/
    prime:
      - bin/
      - lib/
      - share/
      - -share/gdb
      - -share/info
      - -share/man
      - -share/doc
      - -share/lintian
      # Reported unused by snapcraft linter
      - -lib/*/libopcodes-*
      - -lib/*/libbfd-*

  scripts:
    plugin: dump
    source: scripts/
    override-build: |
      set -eux
      gcc -o port-occupied port-occupied.c
      craftctl default
    organize:
      run-cupsd: scripts/run-cupsd
      stop-cupsd: scripts/stop-cupsd
      reload-cupsd: scripts/reload-cupsd
      run-cups-browsed: scripts/run-cups-browsed
      stop-cups-browsed: scripts/stop-cups-browsed
      reload-cups-browsed: scripts/reload-cups-browsed
      run-util: scripts/run-util
      port-occupied: scripts/port-occupied
    prime:
      - scripts/
    build-packages:
      - gcc
    after: [cups, cups-filters, utils]

  cups-proxyd:
    plugin: make
    source: cups-proxyd
    override-build: |
      set -eux
      # We do "make clean" here that we do not accidentally use
      # binaries manually built in the source tree for development and
      # copied into a local Snap build process
      make clean
      craftctl default
    build-environment:
      # To find the libraries built in this Snap
      - LD_LIBRARY_PATH: "${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$CRAFT_STAGE/usr/lib:$CRAFT_STAGE/lib"
    build-packages:
      - gcc
      - libglib2.0-dev
      - libavahi-common-dev
      - libavahi-client-dev
      - libavahi-glib-dev
    organize:
      usr/lib/cups/backend: lib/cups/backend
      usr/sbin: sbin
    after: [cups, cups-filters]